Why choose Growatt SPF 5000 ES Off-Grid Inverter?

Monitoring: The system can also be remotely monitored using a WiFi or GPRS dongle. Parallel scaling is supported.

Charge controller: The MPPT charge controller lowers the voltage of panels to the required level to charge the battery. The current is raised with the same ratio as the voltage is lowered.

This continuously happens during the day to optimize the use of energy. This is dependent on the power of the sun, the angle, and the temperature and health of the panels.

The charge controller also makes sure the battery will not be overcharged, but also not fully discharged.

Capacity expansion: The system’s capacity can be expanded up to 30kW by combining a total of six of these units in parallel operation.

S6-EH1P14K03-NV-YD-L series energy storage inverter is suitable for large residential PV energy storage systems, supports up to 40A MPPT current input, suitable for 182mm/210mm solar panels, integrated battery treatment and protection functions, more friendly to batteries. And can support multiple inverters in parallel to form a single-phase or three-phase system, the maximum power of 160kW. also support AC couple to retrofit existing solar system; Maximum 350A charging and discharging current, providing higher energy density. Intelligent and reliable, make it the first choice for large-scale residential PV energy storage systems.

Single Phase Low Voltage Energy Storage Inverter

Leading Features

• 10 seconds of 200% overload capability
• Multiple inverters can operate together to form a microgrid
• Generator-compatible to extend backup duration during grid power outage
• Supports dual backup ports for intelligent control of critical and non-critical loads
• Automatic switchover time is <4ms, providing seamless transitions from grid to backup
• Supports a maximum input current of 20A, making it ideal for all high-power PV modules of any brand
• Ensures excellent power supply stability, keeping the load unaffected by a weak grid or generator supply fluctuations
• The battery’s DC side can handle a maximum charge/discharge current of up to 290A, allowing it to store more surplus energy generated by PV systems

The LV-HUB is a CAN communication Combiner and can be used to connect multiple master CAN communication addresses from multiple clusters that compose an LV system.

The LV-HUB-XP is not a power device LV-HUB-XP minimum startup voltage is 30 Vdc and max Input voltage is 60Vdc LV HUB-XP max current is 2A and it is equipped with built in fuse rated 5A.

The latest, most advanced features on the industry’s most trusted and proven platform—that’s the essence of OutBack’s new FXR Series of Grid/Hybrid inverter/chargers. Capable of off-grid or grid-connected operation in a single model, the FXR Grid/Hybrid inverter/chargers provide system designers with unprecedented flexibility and compatibility for nearly any power conversion scenario.

The new FXR features and technologies on the acclaimed FX platform include:

• Both off-grid and grid-tied functionality in one unit
• Seven programmable modes, including GridZero and Support Mode and built-in networked communications
• Advanced Battery Charging (ABC) with expanded charging voltages and time parameters, enabling system designers to accommodate the specific charging profiles and algorithms of new and emerging energy storage technologies including Lithium Ion, Aqueous Ion and Flow chemistry batteries
•  Easy system upgradability in the field

FXR inverter/chargers can be paired with a MATE3s remote to add OPTICS RE to remotely monitor and control system performance from any location. Available in power ranges from 2000W-3600W, multiple units may be stacked and connected with other OutBack Power electronics for more seamless system integration and the ability to function in a wide variety of applications, and system sizes. Up to nine inverters can be combined in a 3-phase system with the 12V, 24V or 48V models, and up to 36kW in a grid-tied 24V or 48V system. The exclusive modular system architecture means that increased power output is just an additional FXR inverter/charger away.

Available in sealed or vented units with NEMA type 1 die-cast aluminum chassis designed to operate in the harshest environmental conditions such as high temperatures, humidity or corrosive salt air, the FXR’s continue in OutBack’s tradition of absolute dependability in mission critical installations no matter how harsh or challenging the conditions.

Features:

•  Dimensions (LxWxH): 16.25 × 8.25 × 12 inches
•  Weight: 28 kg
•  Single-phase, 230V Sinewave Output
•  Programmable for Seven Different Modes with Generator Assist
•  Modular, Stackable Design for up to Nine Inverters in Three-phase and 10 Inverters in Grid-tied
•  Up to 93% Operating Efficiency
•  Field Upgradable Software
•  Standard 5-Year Warranty with Optional 10-Year Upgrade