The Conext Automatic Generator Start (AGS) can automatically activate or stop a generator in response to changing power requirements. Excellent addition to an off-grid or backup power system, the AGS seamlessly connects to the Xanbus network and shares status information with all other devices on the network. It can monitor a set of system user-programmable parameters such as battery voltage, state of charge, or grid power and can activate the generator in response to any changes. The Conext AGS can also be configured remotely using the Insight energy management system to engage a generator and can assist an inverter/charger when output power demands are high.

Why Choose Conext Automatic Generator Start

Higher Return on Investment

• Integrate with an inverter/charger to maximize system power performance

Designed for Reliability

• Tested and qualified for harsh environmental conditions (HALT reliability testing)

Flexible

• Works with multiple Xanbus devices such as XW Pro, SW, MPPT 60-150, MPPT 80-600, MPPT 100-600, SCP, Insight
• User-programmable trigger settings to meet specific application needs such as battery voltage, exercise time, inverter AC power loads, SOC, and quiet time
• Supports manual start and stop operation modes

Easy to Service

• Access and troubleshoot AGS device events using the Insight or SCP
• Easily upgrade new firmware to the AGS using Insight

Easy to Install

• Wall mount
• RJ45 connections for Xanbus network cables

Large capacity all-in-one hybrid inverter for commercial application, supporting up to 600kW system capacity.

Features

• All-in-one hybrid inverter
  Battery, load, grid, and solar connection are all supported.
• Programmable working mode
  Peak-shaving, back-up, use the system however you want it.
•  Scalable design
  Quadruple capacity by paralleling 4 units.
• Hot back-up One inverter fails in a parallel system, the other(s) takes over seamlessly.
• Touchscreen LCD
  More convenient for parameter setting and maintenance.
• Seamless transfer
  Uninterruptable power supply guaranteed.
• Dry contact output
  Supports remote control of DG.

• • Multifunctional

  Similar to the MultiPlus, the Quattro is also a combined inverter and charger. Additionally, it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple systems integration features such as three or split-phase operation and parallel operation.

  • Two AC Inputs & two AC Outputs

  The Quattro can be connected to two independent AC sources, for example, shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is life only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.

  • Unique PowerAssist feature

  The Quattro will prevent the overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shoreside supply with power taken from the battery.

  • Virtually unlimited power thanks to parallel operation

  Up to 6 Quattros can operate in parallel to achieve higher power output. Three-phase or split-phase operation is also possible. Please check our datasheets to see which models have parallel, three-phase, and split-phase capabilities.

  • Remote Monitoring and Control

  Monitor and control your Quattro and system or systems locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop, or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Quattro to setting a Geofence for-hire vehicles and more…

The 5K3 XP is the most advanced Lithium Module for Home and Industrial Energy Storage systems. One product suitable for two applications LV and HV. Fast connections. Wall Mounted, floor mounted, Stackable, serial or parallel application. High Capacity thanks to expandible and simple configuration. Wireless monitoring for real time intervention and maintenance.

LOW VOLTAGE AND HIGH VOLTAGE

SINGLE MODULE: