• • Multifunctional

  Similar to the MultiPlus, the Quattro is also a combined inverter and charger. Additionally, it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple systems integration features such as three or split-phase operation and parallel operation.

  • Two AC Inputs & two AC Outputs

  The Quattro can be connected to two independent AC sources, for example, shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is life only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.

  • Unique PowerAssist feature

  The Quattro will prevent the overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shoreside supply with power taken from the battery.

  • Virtually unlimited power thanks to parallel operation

  Up to 6 Quattros can operate in parallel to achieve higher power output. Three-phase or split-phase operation is also possible. Please check our datasheets to see which models have parallel, three-phase, and split-phase capabilities.

  • Remote Monitoring and Control

  Monitor and control your Quattro and system or systems locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop, or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Quattro to setting a Geofence for-hire vehicles and more…

The SmartSolar MPPT RS solar charge controllers are Victron’s solution for systems with large series-connected PV arrays charging 48 V DC battery banks. This product is perfect for large off-grid, and grid-connected battery systems.

Available in a 5.76kW and 11.52kW model, features include a wide 80-450 VDC operating solar voltage input, independent tracking inputs, full connectivity, isolated PV connections, display screen, and fully programmable battery charging parameters and active cooling. The new metal case design and fully covered electrical connections improve the safety and modernize the presentation in line with the latest suite of Victron products.

MPPT: Ultra Fast Maximum Power Point Tracking

The SmartSolar RS solar charge controller connects to a PV array of between 80 and 450 Volt Voc and will efficiently charge your 48V battery bank with either 100A or 200A.

The charge settings are fully programmable and can be set up for different battery chemistries, like lead-acid, lithium, and more.

Setup and monitor with VictronConnect

The SmartSolar RS charge controller can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, historical data and trends.

Daisy Chain Additional Units

The SmartSolar RS charge controller is equipped with VE.Can bus ports. This allows for communication with additional SmartSolar RS & VE.Can MPPT units. The additional units are simply “daisy-chained” to each other with an RJ45 cable.

When connected to each other, all individual charge controllers will synchronize their charge stages. They can also send their data, via the same cable, for monitoring to a GX device (such as the Cerbo GX).

Remote Monitoring and Control

If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your SmartSolar RS charge controllers.

If your installation is connected to a GX device and the internet, Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; for free.

For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the  GlobalLink 520.

SmartSolar Display

The SmartSolar RS charge controller is equipped with a display on the front panel. The display reads battery volts, charge current and voltages from both array’s individually including instantaneous and total figures and unit status including any possible error codes.

I/O Connections

The SmartSolar RS charge controller is equipped with a programmable relay and options for remote temperature and voltage sensing. The remote input can accept the Victron smallBMS and other types of BMS with allow-to-charge signals.

Unmatched Performance for Energy Optimization

Experience peak efficiency in energy management with the DEYE 16 kW Three Phase 3 MPPT Hybrid Inverter – SUN-16K-SG05LP3E-EU. Specifically designed to empower solar energy systems, this advanced inverter offers groundbreaking technology that bridges high output with exceptional reliability. Whether you’re powering a residential property or a larger commercial setup, this is the ideal solution for ensuring optimal energy utilization.

Advanced Three MPPT Technology

At the core of this hybrid inverter lies its state-of-the-art MPPT (Maximum Power Point Tracking) technology. With three MPPT channels, the DEYE 16 kW inverter guarantees precise tracking and harvesting of solar energy even in challenging weather conditions. By maximizing the energy captured from your solar panels, you can significantly reduce energy waste and enhance overall system performance over time.

Durable and Versatile with Three-Phase Power

Built for flexibility and durability, the DEYE 16 kW Hybrid Inverter supports three-phase power output, catering to high-demand energy systems with seamless integration. This feature ensures compatibility with both residential and industrial applications, delivering consistent, uninterrupted power supply regardless of your operational scale. Its robust design ensures long-lasting performance and protection against environmental stressors.

Why Choose DEYE’s Hybrid Solution?

The SUN-16K-SG05LP3E-EU is more than an inverter – it’s a strategic energy investment for those seeking reliability, efficiency, and adaptability. With hybrid capabilities, it effortlessly connects solar, grid, and battery systems, providing you with greater autonomy and control over your power consumption. Additionally, its intuitive system design makes monitoring your energy output a hassle-free experience.

Transform your energy management strategy with the DEYE 16 kW Three Phase 3 MPPT Hybrid Inverter. Engineered for superior performance and longevity, it’s the perfect partner for harnessing sustainable energy. Don’t miss out on this cutting-edge solution tailored to meet your energy needs with utmost efficiency.

FULL BACKUP

• Built-in 63 A bypass for whole home backup
• 10 ms seamless switch
• Peak output up to 13680 VA (10 s) in backup mode

FLEXIBLE APPLICATION

• Up to 200 % PV input with 4 MPPTs
• 50 A fast charge / discharge current
• VPP ready

FRIENDLY INSTALLATION

• Plug & Play installation
• Free online monitoring to enhance energy management

SAFE AND DURABLE

• Support precise AFCI
• IP65/C5