S6-EH1P8K-L-PLUS series energy storage inverter is suitable for residential PV energy storage systems, supports up to 32A MPPT current input, suitable for various high power PV panels; 6-stage timed charge and discharge function, integrated battery treatment and protection functions, more friendly to batteries. And can support multiple inverters in parallel to form a single-phase or three-phase system with a maximum power of 48kW. With UPS switching, provides an independent generator interface to make energy applications more reliable. The product provides solutions for demanding power scenarios with residential energy storage systems.

Single Phase Low Voltage Energy Storage Inverter

Leading Features

• 10 seconds of 200% overload capability
• Multiple inverters can operate together to form a microgrid
• Generator-compatible to extend backup duration during grid power outage
• Supports dual backup ports for intelligent control of critical and non-critical loads
• Automatic switchover time is <4ms, providing seamless transitions from grid to backup
• Ensures excellent power supply stability, keeping the load unaffected by a weak grid or generator supply fluctuations

The BYD B-Box Premium LVL has powerful on-grid, backup and off-grid functions for private and commercial applications.

The new battery storage also has protection rating IP20. This means that the BYD B-Box Premium LVL 15.4 can only be used indoors.

Flexible and Scalable

In total, up to 64 B-Box Premium LVL 15.4 can be connected in parallel to achieve a total capacity of 983.04 kWh.

The BYD Battery-Box Premium LVL 15.4 is compatible with the market leading 1- and 3-phase inverters from GoodWe, Victron and SMA (Sunny Island).

Advantages of the BYD B-Box Premium

• All models of the Battery-Box Premium series comply with the VDE 2510 safety standard and have additional safety functions for installation.
• The systems support parallel connections without the need for additional communication devices.
• They are more flexible and scalable and cover a wider range of applications.
• The new cobalt-free premium generation also features a higher energy density and a more compact format, thus requiring less floor space.
• The higher capacity per module reduces the number of components. In combination with the improved design and a new locking mechanism, this should make installation easier and reduce installation time.
• Lithium Iron Phosphate Battery (LFP): Maximum safety, lifetime and performance
• In addition to a new LED status display, there is also a new interface and the option of remote control.

Specification | STC

• Module Type: JKM550N-72HL4-V
• Maximum Power (Pmax): 550Wp
• Maximum Power Voltage (Vmp): 41.64V
• Maximum Power Current (Imp): 13.33A
• Open-circuit Voltage (Voc): 50.34V
• Short-circuit Current (Isc): 14.07A
• Module Efficiency STC (%): 21.48%
• Operating Temperature (℃): -40℃~+85℃
• Maximum system voltage: 1000/1500VDC (IEC)
• Maximum series fuse rating: 25A
• Power tolerance: 0~+3%
• Temperature coefficients of Pmax: -0.35%/℃
• Temperature coefficients of Voc: -0.28%/℃
• Temperature coefficients of Isc: 0.048%/℃
• Nominal operating cell temperature (NOCT): 45±2℃

Mechanical Characteristics

• Cell Type: N type Mono-crystalline
• No. of cells: 144 (6×24)
• Dimensions: 2278×1134×35mm (89.69×44.65×1.38 inch)
• Weight: 28.9 kg (61.73 lbs)
• Front Glass: 3.2mm, Anti-Reflection Coating, High Transmission, Low Iron, Tempered Glass
• Frame: Anodized Aluminium Alloy
• Junction Box: IP68 Rated
• Output Cables: TUV 1×4.0mm2 (+): 400mm , (-): 200mm or Customized Length

Protect your system from lightning strikes with the Midnite Solar Surge Protective Device (SPD). Designed for both AC and DC solar electric systems, it provides protection to service panels, load centers, or where the surge protector is directly connected.

Designed for both indoor and outdoor use, the SPD is offered in three different voltages—115, 300 and 600 volts. Protection is achieved by reducing the clamping voltage to a safe level that your system can sustain and that won’t damage electronic components.

This Midnite Solar surge suppressor is a welcome replacement to arrestors that have been used in the past. Providing eight times the protection as previous arrestors, it is much better at clamping surges to a safe voltage.

Features & Attributes:

• Dimensions (LxWxH): 4.4 × 3.8 × 3.5 inches
• Weight: 0.4 kg
• Much safer than previous surge suppressors
• Engineered for both AC and DC electric systems
• ETL listed
• Type 1 Device
• MPN: MNSPD-300-AC