Back to Products
Jinko Solar Tiger 78TR 485 Watts Mono-Facial Module
Jinko Solar Tiger 78TR 485 Watts Mono-Facial Module - Image 2
Jinko Solar Tiger 78TR 485 Watts Mono-Facial Module - Image 3

Jinko Solar Tiger 78TR 485 Watts Mono-Facial Module

(0)

₦133,375.00

Quantity:

Free Delivery

Nationwide shipping

Warranty

Manufacturer guarantee

Expert Support

Installation & maintenance

  • Description
  • Features
  • Specifications
  • Reviews

Description

Key Features

  • TR technology + Half Cell
    TR technology with Half-cell aims to eliminate the cell gap to increase module efficiency (mono-facial up to 21.38%)
  • 9BB instead of 5BB
    9BB technology decreases the distance between bus bars and finger grid line which is benefit to power increase.
  • Higher lifetime Power Yield
    2% first year degradation, 0.55% linear degradation
  •  Best Warranty
    12-year product warranty, 25-year linear power warranty
  • Enhanced Mechanical Load
    Certified to withstand wind load (2400 Pascal) and snow load (5400 Pascal).
  •  Avoid debris, cracks and broken gate risk effectively
    9BB technology using circular ribbon that could avoid debris, cracks and broken gate risk effectively

Specification | STC

  • Module Type: JKM480M-7RL3-V
  • Maximum Power (Pmax): 480Wp
  • Maximum Power Voltage (Vmp): 43.48V
  • Maximum Power Current (Imp): 11.04A
  • Open-circuit Voltage (Voc): 52.34V
  • Short-circuit Current (Isc): 11.86A
  • Module Efficiency STC (%): 21.38%
  • Operating Temperature (℃): -40℃~+85℃
  • Maximum system voltage: 1000/1500VDC (IEC)
  • Maximum series fuse rating: 20A
  • Power tolerance: 0~+3%
  • Temperature coefficients of Pmax: -0.35%/℃
  • Temperature coefficients of Voc: -0.28%/℃
  • Temperature coefficients of Isc: 0.048%/℃
  • Nominal operating cell temperature (NOCT): 45±2℃

 

Mechanical Characteristics

  • Cell Type: P type Mono-crystalline
  • No. of cells: 156 (2×78)
  • Dimensions: 2182×1029×35mm (85.91×40.51×1.38 inch)
  • Weight: 25.0kg (55.12 lbs)
  • Front Glass: 3.2mm, Anti-Reflection Coating,
    High Transmission, Low Iron, Tempered Glass
  • Frame: Anodized Aluminum Alloy
  • Junction Box: IP68 Rated
  • Output Cables: TUV 1×4.0mm2 (+): 250mm, (-): 150mm or Customized Length

Key Features

No features available for this product.

Technical Specifications

No specifications available for this product.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Jinko Solar Tiger 78TR 485 Watts Mono-Facial Module”

Your email address will not be published. Required fields are marked *

Please log in to write a review. You must purchase this product to leave a review.

AI-Powered Recommendations

Customers who viewed this item also loved these

Morningstar EcoBoost MPPT Solar Charge and Lighting Controller 12/24V 40A with Meter
Add to Cart
(0)

Morningstar EcoBoost MPPT Solar Charge and Lighting Controller 12/24V 40A with Meter

The EcoBoost MPPT solar charge controller brings Morningstar’s proprietary TrakStar Technology to our new line of Essentials

controllers and accessories. The EcoBoost controllers automatically detect 12 or 24 V system configuration. They are highly efficient and accurate controllers designed to ensure that batteries attain a complete state of charge.

They are also sophisticated load controllers. Using this feature to manage DC power consumption protects the batteries from over discharge and helps ensure long-term system reliability. Small DC loads can be powered directly from the EcoBoost by way of two USB
charging ports.

Morningstar EcoBoost controllers act as the central brain of PV powered DC electrical systems up to 1,120 watts and offer outstanding value, performance, and dependability.

KEY FEATURES AND BENEFITS

• Rugged, Maintenance-free Design

Conformally coated circuit board and corrosion resistant terminals.

• Maximizes Energy Harvest

Using TrakStar MPPT technology to determine and adjust to the true maximum power point as solar insolation changes throughout the day.

• High Efficiency

At low, medium, and high power levels.

• Optional Meter

Provides access to system operational information, including current and historical performance data. All EcoBoost “M” controllers include the meter.

₦795,025
WECO Hybo CS 250 kW Hybrid Inverter
WECO Battery WECO ESS
Add to Cart
(0)

WECO Hybo CS 250 kW Hybrid Inverter

HYBO CS Buck mode HYBRID HYBO BUILT IN TRANSFORMER
PV Buck Mode
Model CS100 CS150 CS250 CS500
On Grid AC specifications
Max. Output power (kVA) 110 165 275 550
Rated Output Power (kW) 100 150 250 500
Rated Voltage (V) 400
Voltage Range (V) 320~460
Rated Current (A) 144 216 361 722
Rated Frequency (Hz) 50 / 60
Frequency Range (Hz) 45~55 – 55~65
THDi <3%
Power Factor 1 lagging – 1 leading (Settable)
AC Connection 3W+N+PE
Transformer Ratio 270 / 400 270 / 400 270 / 400 315 / 400
Model CS100 CS150 CS250 CS500
Off Grid Specifications
Max. Output Power (kVA) 110 165 275 550
Rated Power (kW) 100 150 250 500
Rated Voltage (V) 400
Rated Current (A) 144 216 361 722
THDU ≤1% linear; or ≤5% nonlinear
Rated Frequency (Hz) 50 / 60
Overload Capacity 110% Continuous / 150% 10 sec
On to Off-grid Transfer Time 13ms
Model CS100 CS150 CS250 CS500
High Voltage PV Input (Buck Mode)
PV Input Voltage Range (Voc)（V@25°C） 655-900 780-900
Max. PV Power (kW) MPPT in step of 60kW 120 / 180 / 240 120 / 180 / 240 300 / 360 600 / 660 / 720
MPPT Voltage Range（V@25°C） 544-747 648-747
buck mode Battery
Battery Voltage Range (V) 420-672 500-672
Battery cabinet Composition Min 8 Max 12 Batteries Min 9 Max 12 Batteries
Max. Charging Power (kW) 120 / 180 / 240 120 / 180 / 240 300 / 360 600 / 660 / 720
Model CS100 CS150 CS250 CS500
General Data
Max On and Off grid parallel Units 10
Dimension W*D*H (mm) 1200*800*2050 1200*800*2050 (600*720*2050) *1+1200*800*2050 (600*720*2,050) *2+1600*1050*2050
Weight (kg) 1120 / 1150 / 1180 1250 / 1280/1310 1980 / 2010 3265/3295/3325
Operation Temperature (℃) -30~55
Relative Humidity 0~95% non-condensing
IP Rating IP20
Noise Emission (dB) <70
Altitude 4,000m (>3,000 Derating)
Cooling Forced Air Cooling
Display and Communication
Display LCD touchscreen / NooR Smart App
BMS Communication RS485, CAN
EMS Communication RS485, TCP/IP
Standards EN62109-1/-2, EN62447-1, EN61000-6-2, EN61000-6-4, South Africa NRS097-2-1:2017, Pakistan & India IEC62116, IEC61683

See warranty for performance warranty applicability.
See Performance Warranty Terms and the Standard Test Conditions “STC”.
All data is subjected to change without prior notice: Always ask WeCo for the most recent datasheet and manual before purchasing.
No part of this document can be copied or reproduced without WeCo written permission.

₦0
BYD Battery-Box Premium LVL 15.4 kWh Lithium Iron Phosphate (LFP) Battery
BYD
Add to Cart
(0)

BYD Battery-Box Premium LVL 15.4 kWh Lithium Iron Phosphate (LFP) Battery

The BYD B-Box Premium LVL has powerful on-grid, backup and off-grid functions for private and commercial applications.

The new battery storage also has protection rating IP20. This means that the BYD B-Box Premium LVL 15.4 can only be used indoors.

Flexible and Scalable

In total, up to 64 B-Box Premium LVL 15.4 can be connected in parallel to achieve a total capacity of 983.04 kWh.

The BYD Battery-Box Premium LVL 15.4 is compatible with the market leading 1- and 3-phase inverters from GoodWe, Victron and SMA (Sunny Island).

Advantages of the BYD B-Box Premium

  • All models of the Battery-Box Premium series comply with the VDE 2510 safety standard and have additional safety functions for installation.
  • The systems support parallel connections without the need for additional communication devices.
  • They are more flexible and scalable and cover a wider range of applications.
  • The new cobalt-free premium generation also features a higher energy density and a more compact format, thus requiring less floor space.
  • The higher capacity per module reduces the number of components. In combination with the improved design and a new locking mechanism, this should make installation easier and reduce installation time.
  • Lithium Iron Phosphate Battery (LFP): Maximum safety, lifetime and performance
  • In addition to a new LED status display, there is also a new interface and the option of remote control.
₦9,496,775
ATESS ATS 30 kW for HPS 30 kW Hybrid Inverter
ATESS Power
Add to Cart
(0)

ATESS ATS 30 kW for HPS 30 kW Hybrid Inverter

ATESS Automatic Transfer Switch is an accessory of HPS, when both the grid and the DG need to access HPS, the Automatic Transfer Switch will be used to switch between grid and DG automatically.

Features:

  • HPS compatible
  • Flexible management
  • Support remote control of DG.
  • Transfer automatically between grid and DG.
₦0