Back to Products
ATESS HPS 30 kW Hybrid 3 Phase Inverter
ATESS HPS 30 kW Hybrid 3 Phase Inverter - Image 2

ATESS HPS 30 kW Hybrid 3 Phase Inverter

(0)

₦0.00

In Stock ( available)
In Stock ( available)
Quantity:

Free Delivery

Nationwide shipping

Warranty

Manufacturer guarantee

Expert Support

Installation & maintenance

  • Description
  • Features
  • Specifications
  • Reviews

Description

Large capacity all-in-one hybrid inverter for commercial application, supporting up to 600kW system capacity.

Features

  • All-in-one hybrid inverter
    Battery, load, grid, and solar connection are all supported.
  • Programmable working mode
    Peak-shaving, back-up, use the system however you want it.
  •  Scalable design
    Quadruple capacity by paralleling 4 units.
  • Hot back-up 

    One inverter fails in a parallel system, the other(s) takes over seamlessly.

  • Touchscreen LCD
    More convenient for parameter setting and maintenance.
  • Seamless transfer
    Uninterruptable power supply guaranteed.
  • Dry contact output
    Supports remote control of DG.

Key Features

No features available for this product.

Technical Specifications

No specifications available for this product.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “ATESS HPS 30 kW Hybrid 3 Phase Inverter”

Your email address will not be published. Required fields are marked *

Please log in to write a review. You must purchase this product to leave a review.

AI-Powered Recommendations

Customers who viewed this item also loved these

Victron Energy VE.Direct Cable
Victron Energy
Add to Cart
(0)

Victron Energy VE.Direct Cable

The VE.Direct cable is available in different lengths. There is a straight and 90-degree angle model.

₦31,200
Grundfos RSI 3×380-440V IP66 5.5kW 12A
Grundfos
Add to Cart
(0)

Grundfos RSI 3×380-440V IP66 5.5kW 12A

RSI 3×380-440V IP66 5.5kW 12A

Renewable Solar Inverter RSI is an off-grid solar inverter to enable end-user to use solar power for a wide range of water applications. RSI is customized specifically to be compatible with Grundfos pumps. With the built-in MPPT and various protection software, it delivers an efficient and reliable solar system solution.

 

  • 3-phase 208V, 380V or 440V
  • Quick setup wizard
  • Preconfigured inputs
  • Build-in MPPT (Maximum power point tracking)
  • AC and DC power source compatible
  • Solar solution for up to 250kW

RSI offers the following inputs and output:

  • RS-485 Modbus RTU/TCP
  • 6 Digital inputs, preconfigured for solar application
  • 2 Signal relays, RUN/FAULT

 

Technical:
Approvals and markings: CE
Installation:
Range of ambient temperature: -10 .. 60 °C
Relative humidity: 100 %
Electrical data:
Rated power – P2: 5.5 kW
Mains frequency: 50 / 60 Hz
Rated voltage: 3 x 380 – 440 V
Enclosure class (IEC 34-5): IP66
Rated voltage output AC: 380 V
Voltage input DC: 800 V
Rated current output AC: 12 A
Udc: 400 V
Others:
Net weight: 8.8 kg
Gross weight: 9.8 kg
₦2,424,705
Jinko Solar Tiger Neo N-type 72HL4-(V) 555 Watts Mono-Facial Module
Jinko Solar
Add to Cart
(0)

Jinko Solar Tiger Neo N-type 72HL4-(V) 555 Watts Mono-Facial Module

Specification | STC

  • Module Type: JKM555N-72HL4-V
  • Maximum Power (Pmax): 555Wp
  • Maximum Power Voltage (Vmp): 41.64V
  • Maximum Power Current (Imp): 13.33A
  • Open-circuit Voltage (Voc): 50.34V
  • Short-circuit Current (Isc): 14.07A
  • Module Efficiency STC (%): 21.48%
  • Operating Temperature (℃): -40℃~+85℃
  • Maximum system voltage: 1000/1500VDC (IEC)
  • Maximum series fuse rating: 25A
  • Power tolerance: 0~+3%
  • Temperature coefficients of Pmax: -0.35%/℃
  • Temperature coefficients of Voc: -0.28%/℃
  • Temperature coefficients of Isc: 0.048%/℃
  • Nominal operating cell temperature (NOCT): 45±2℃

Mechanical Characteristics

  • Cell Type: N type Mono-crystalline
  • No. of cells: 144 (6×24)
  • Dimensions: 2278×1134×35mm (89.69×44.65×1.38 inch)
  • Weight: 28.9 kg (61.73 lbs)
  • Front Glass: 3.2mm, Anti-Reflection Coating, High Transmission, Low Iron, Tempered Glass
  • Frame: Anodized Aluminium Alloy
  • Junction Box: IP68 Rated
  • Output Cables: TUV 1×4.0mm2 (+): 400mm , (-): 200mm or Customized Length
₦104
Suntech Ultra V 555W Half-Cell Mono-Facial Module
Suntech Power
Add to Cart
(0)

Suntech Ultra V 555W Half-Cell Mono-Facial Module

Mechanical Characteristics

  • Solar Cell: Monocrystalline silicon 182 mm
  • No. of Cells: 144 (6 × 24)
  • Dimensions: 2278 × 1134 × 35 mm (89.7 × 44.6 × 1.4 inches)
  • Weight: 27.5 kgs (60.6 lbs.)
  • Front Glass: 3.2 mm (0.126 inches) fully tempered glass
  • Output Cables: 4.0 mm2, (-) 350 mm (+) 160 mm in length or customized length
  • Junction Box: IP68 rated (3 bypass diodes)
  • Operating Module Temperature: -40 °C to +85 °C
  • Maximum System Voltage: 1500 V DC (IEC)
  • Maximum Series Fuse Rating: 25 A
  • Power Tolerance: 0/+5 Wc

Electrical Characteristics

  • Module Type: STP555S-C72/Vmh
  • Testing Condition: STC
  • Maximum Power (Pmax/W): 555
  • Optimum Operating Voltage (Vmp/V): 42.24
  • Optimum Operating Current (Imp/A): 13.14
  • Open Circuit Voltage (Voc/V): 50.07
  • Short Circuit Current (Isc/A): 14.07
  • Module Efficiency (%): 21.5
₦104