UF5000 is the latest Pylontech 48V LFP battery with bigger capacity at 5.12kWh modular and stronger functions for high current strike endurance, dual active protection, remote upgrade feature, widely internal compatibility up to 20 modules per single string.

Advantage

• Flexible for Mixed Usage
• Free to Scale Up
• 19 inches Rack Compatible
• High Power Efficiency

Technical Specifications

• Nominal Voltage (VDC): 51.2
• Nominal Capacity (kWh): 5.12
• Usable Capacity (kWh): 4.864
• Dimension (W*D*H mm): 442*420*161
• Weight (kg): 42
• Depth of Discharge: 95%
• Charge/Discharge (A) (Normal): 100
• Charge/Discharge (A) (Max): 100
• Charge/Discharge (A) (Peak): 121-200 @15s
• Communication Port: RS485/CAN
• Single String Quantity (pcs): 20
• Working Temperature/ (℃) Charge: -10~55
• Working Temperature/ (℃) Discharge: -10~55
• Storage Temperature/ (℃): -20~60
• Short current/duration time (A): <2000/1ms
• IP rating: IP20
• Humidity (RH): 5%-95% No Condensation
• Altitude (m): <4000
• Design life (@25℃): 15 years
• Cycle Life (@25℃): >6000
• Certification: IEC62619/UN38.3/RoHS/Reach/WEEE/MSDS

Higher yields / Safe & Reliable / Smart / User-friendly

SUN-20K-SG05LP3-EU-SM2 is a brand new three-phase hybrid inverter with a low-voltage battery, ensuring the system is safe and reliable. With a compact design and high-power density, this series supports a 1.3 DC/AC ratio, saving device investment. It supports a three-phase unbalanced output, extending the application scenarios. Equipped with CAN port (x2) BMS and parallel, x1 RS485 port for BMS, x1 RS232 port for remote control, and x1 DRM port, which makes the system smart and flexible.

It is equipped with RS485 / CAN port for battery communication.

Remotely shutdown function

Smart Monitoring Platform
Thanks to the smart monitoring platform, Deye full series inverter products support remote shutdown immediately when an accident occurs. Setting parameters and FW updates remotely, which makes PV plant O&M easier.

Key Features

• 100% unbalanced output, each phase; Max. output up to 50% rated power
• AC couple to retrofit existing solar system
• Max. 10 pcs parallel for on-grid and off-grid operation; Support multiple batteries parallel
• Max. charging/discharging current of 350A
• Support storing energy from diesel generator
• 48V low voltage battery, transformer isolation design
• 6 time periods for battery charging/discharging

Technical Specifications

CU 202 is designed for monitoring and controlling SQFlex submersible pumps in solar applications.

The simple user interface and built-in Bluetooth module ensure easy installation and configuration. The Bluetooth connection to the Grundfos GO app offers extensive setup and monitoring options.

CU 202 is pre-configured for tank filling, the most used application, offering a plug-and-pump solution, which saves time on commissioning. For other applications, the controller provides several control modes, which can be easily selected and set through the Grundfos GO app. Grundfos GO makes the configuration easier and allows installers to set up high-performing systems.

CU 202 communicates with the pump through the power cable. This communication principle is called mains borne signaling or powerline communication and means that no additional cables are required to the pump.

Grundfos GO offers detailed information and logs that help the installer to find the root cause in failure situations. In addition, the controller can use Wi-Fi, GENIbus, or Modbus to monitor the system remotely either through Grundfos Connect or another SCADA system. Remote monitoring saves time when inspecting installations.

CU 202 is equipped with power and pump connections and offers 2 configurable inputs and outputs. Additionally, a backup battery can be added to the controller to maintain communication and measurements when solar power is insufficient.

The display of the controller shows:

The pump can be turned on and off through the display of the controller. The controller can display a read-out of the application-related data. It is also possible to adjust the setpoint. The LEDs on the display of the controller can be set to sleep mode, for example, to avoid attracting wildlife.

The following logs are available through Grundfos GO or remote monitoring:

CU 202 indicates warnings and alarms on the display of the controller. Additionally, the Grundfos GO app provides further information on these events including the recommended solutions.

RSI 3×380-440V IP66 30kW 61A

Renewable Solar Inverter RSI is an off-grid solar inverter to enable end-user to use solar power for a wide range of water applications. RSI is customized specifically to be compatible with Grundfos pumps. With the built-in MPPT and various protection software, it delivers an efficient and reliable solar system solution.

RSI offers the following inputs and output: