Back to Products
Victron Energy SmartSolar MPPT 250/100-Tr VE.Can Solar Charge Controller 
Victron Energy SmartSolar MPPT 250/100-Tr VE.Can Solar Charge Controller  - Image 2
Victron Energy SmartSolar MPPT 250/100-Tr VE.Can Solar Charge Controller  - Image 3
Victron Energy SmartSolar MPPT 250/100-Tr VE.Can Solar Charge Controller  - Image 4

Victron Energy SmartSolar MPPT 250/100-Tr VE.Can Solar Charge Controller 

(0)

₦902,750.00

  • Solar charge controller

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery bank.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

Quantity:

Free Delivery

Nationwide shipping

Warranty

Manufacturer guarantee

Expert Support

Installation & maintenance

  • Description
  • Features
  • Specifications
  • Reviews

Description

  • Solar charge controller

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery bank.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

  • MPPT: Ultra Fast Maximum Power Point Tracking

The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.

The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.

  • Control Your Charger Remotely

The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.

  • Daisy Chain Additional Units

The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy-chained” to each other with a single RJ45 cable between the individual units.

When connected to each other, all individual VE.Can SmartSolar chargers, will synchronize their charge stages. They can also send their data, via a single cable, to a GX monitoring device.

  • Remote Monitoring and Control

If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).

For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the  GlobalLink 520.

  • SmartSolar Control Display

The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device.

Key Features

No features available for this product.

Technical Specifications

No specifications available for this product.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Victron Energy SmartSolar MPPT 250/100-Tr VE.Can Solar Charge Controller ”

Your email address will not be published. Required fields are marked *

Please log in to write a review. You must purchase this product to leave a review.

AI-Powered Recommendations

Customers who viewed this item also loved these

DEYE 50 kW Three Phase 3 MPPT Hybrid Inverter
DEYE
Add to Cart
(0)

DEYE 50 kW Three Phase 3 MPPT Hybrid Inverter

Higher yields / Safe & Reliable / Smart / User-friendly

SUN-50K-SG01HP3-EU-BM4 is a brand new three-phase hybrid inverter with a high-voltage battery, ensuring the system is safe and reliable. With a compact design and high-power density, this series supports a 1.3 DC/AC ratio, saving device investment. It supports a three-phase unbalanced output, extending the application scenarios. Equipped with CAN port (x2) BMS and parallel, x1 RS485 port for BMS, x1 RS232 port for remote control, and x1 DRM port, which makes the system smart and flexible.

It is equipped with RS485 / CAN port for battery communication.

Remotely shutdown function

Smart Monitoring Platform
Thanks to the smart monitoring platform, Deye full series inverter products support remote shutdown immediately when an accident occurs. Setting parameters and FW updates remotely, which makes PV plant O&M easier.

  • 100% unbalanced output, each phase; Max. output up to 50% rated power
  • DC coupled and AC coupled to retrofit existing solar system.
  • Max. 10 pcs parallel for on-grid and off-grid operation; Support multiple batteries parallel
  • Max. charging/discharging current of 100A
  • High voltage battery, higher efficiency
  • 6 time periods for battery charging/discharging
  • Support storing energy from diesel generators.

Technical Specifications

Model SUN-25K-SG01HP3-EU-BM2 SUN-30K-SG01HP3-EU-BM3 SUN-40K-SG01HP3-EU-BM4 SUN-50K-SG01HP3-EU-BM4
Battery Input Data
Battery Type Lithium-ion
Battery Voltage Range (V) 150~800V
Max. Charging Current (A) 50A+50A
Max. Discharging Current (A) 50A+50A
Number of battery input 2
Charging Strategy for Li-Ion Battery Self-adaption to BMS
PV String Input Data
Max. DC Input Power (W) 32500W 39000W 52000W 65000W
Max. DC Input Voltage (V) 1000V
Start-up Voltage (V) 150V
MPPT Range (V) 200V-850V
Full Load DC Voltage Range (V)
450-850
360-850
360-850
450-850
Rated DC Input Voltage (V)
600
PV Input Current (A) 36A+36A 36A+36A+36A 36A+36A+36A+36A
Max. PV ISC (A) 55A+55A 55A+55A+55A 55A+55A+55A+55A
No. of MPP Trackers 2 3 4
No. of Strings per MPP Tracker 2
AC Output Data
Rated AC Output and UPS Power (W) 25000W 3000W 40000W 50000W
Max. AC Output Power (W) 27500W 33000W 44000W 55000W
Peak Power (off-grid) 1.5 times of rated power, 10 S
AC Output Rated Current (A) 38 45.6 60.8 75.8
Max. AC Current (A) 50 60 70 83.3
Max. Continuous AC Passthrough (A) 150A
Output Frequency and Voltage 50/60Hz;3L/N/PE 220/380Vac，230/400Vac
Grid Type Three Phase
DC injection current (mA) <0.5% 1n
Efficiency
Max. Efficiency 97.60%
Euro Efficiency 97.00%
MPPT Efficiency 99.90%
Protection
PV Input Lightning Protection Integrated
Anti-islanding Protection Integrated
PV String Input Reverse Polarity Protection Integrated
Insulation Resistor Detection Integrated
Residual Current Monitoring Unit Integrated
Output Over Current Protection Integrated
Output Shorted Protection Integrated
Output Over Voltage Protection Integrated
Surge protection DC Type II / AC Type II
Certifications and Standards
Grid Regulation CEI 0-21, VDE-AR-N 4105, NRS 097, IEC 62116, IEC 61727, G99, G98, VDE 0126-1-1, RD 1699, C10-11
Safety EMC / Standard IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2
General Data
Operating Temperature Range (℃) -40~60℃, >45℃ Derating
Cooling Smart cooling noise
Noise (dB) <45 dB
Communication with BMS RS485; CAN
Weight (kg) 60
Size (mm) 560.5W×837H×319D
Protection Degree IP65
Installation Style Wall-mounted
Warranty 5 years

 

₦8,075,760
Victron Energy VE.Direct Cable
Victron Energy
Add to Cart
(0)

Victron Energy VE.Direct Cable

The VE.Direct cable is available in different lengths. There is a straight and 90-degree angle model.

₦31,200
Grundfos SQFlex 3A-10 Solar Submersible Pump
Grundfos
Add to Cart
(0)

Grundfos SQFlex 3A-10 Solar Submersible Pump

SQF 3A-10

The 4″ SQF centrifugal pump is for low heads and large flow rates.

The SQFlex system is a reliable water supply system based on renewable energy sources, such as solar and wind energy. Thanks to its flexible energy supply and performance, the SQFlex system can be combined and adapted to meet any need on the installation site.

The SQFlex system has a wide voltage range, built-in maximum power point tracking (MPPT) as well as dry-running, voltage and overload protection.

LIQUID:
Pumped liquid: Water
Liquid max temp: 40 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³

TECHNICAL:
Approvals: CE,EAC,CN RoHS Exempt,Morocco
Zinc Anodes: NO

MATERIALS:
Pump: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Impeller: Stainless steel
DIN W.-Nr. 1.4301
AISI 304

INSTALLATION:
Maximum ambient pressure: 15 bar
Pump outlet: Rp 1 1/4
Minimum borehole diameter: 104 mm

ELECTRICAL DATA:
Motor type: MSF3
Power input – P1: 1.4 kW
Rated voltage ac: 1 x 90-240 V
Rated voltage dc: 30-300 V
Rated current: 8.4 A
Power factor: 1.0
Rated speed: 3600 rpm
Start. method: direct-on-line
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of cable: 2 m
Motor No: 96275336
Udc: 300 V
30 V

OTHERS:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 9.8 kg
Gross weight: 10.9 kg
Shipping volume: 0.028 m³
Country of origin: MX
Custom tariff no.: 84137029

 

₦1,700,000
Jinko Solar Tiger 78TR 485 Watts Mono-Facial Module
Jinko Solar
Add to Cart
(0)

Jinko Solar Tiger 78TR 485 Watts Mono-Facial Module

Key Features

  • TR technology + Half Cell
    TR technology with Half-cell aims to eliminate the cell gap to increase module efficiency (mono-facial up to 21.38%)
  • 9BB instead of 5BB
    9BB technology decreases the distance between bus bars and finger grid line which is benefit to power increase.
  • Higher lifetime Power Yield
    2% first year degradation, 0.55% linear degradation
  •  Best Warranty
    12-year product warranty, 25-year linear power warranty
  • Enhanced Mechanical Load
    Certified to withstand wind load (2400 Pascal) and snow load (5400 Pascal).
  •  Avoid debris, cracks and broken gate risk effectively
    9BB technology using circular ribbon that could avoid debris, cracks and broken gate risk effectively

Specification | STC

  • Module Type: JKM480M-7RL3-V
  • Maximum Power (Pmax): 480Wp
  • Maximum Power Voltage (Vmp): 43.48V
  • Maximum Power Current (Imp): 11.04A
  • Open-circuit Voltage (Voc): 52.34V
  • Short-circuit Current (Isc): 11.86A
  • Module Efficiency STC (%): 21.38%
  • Operating Temperature (℃): -40℃~+85℃
  • Maximum system voltage: 1000/1500VDC (IEC)
  • Maximum series fuse rating: 20A
  • Power tolerance: 0~+3%
  • Temperature coefficients of Pmax: -0.35%/℃
  • Temperature coefficients of Voc: -0.28%/℃
  • Temperature coefficients of Isc: 0.048%/℃
  • Nominal operating cell temperature (NOCT): 45±2℃

 

Mechanical Characteristics

  • Cell Type: P type Mono-crystalline
  • No. of cells: 156 (2×78)
  • Dimensions: 2182×1029×35mm (85.91×40.51×1.38 inch)
  • Weight: 25.0kg (55.12 lbs)
  • Front Glass: 3.2mm, Anti-Reflection Coating,
    High Transmission, Low Iron, Tempered Glass
  • Frame: Anodized Aluminum Alloy
  • Junction Box: IP68 Rated
  • Output Cables: TUV 1×4.0mm2 (+): 250mm, (-): 150mm or Customized Length
₦133,375