Back to Products
Victron Energy Quattro 48V/15000VA/200-100/100 Inverter/Charger
Victron Energy Quattro 48V/15000VA/200-100/100 Inverter/Charger - Image 2

Victron Energy Quattro 48V/15000VA/200-100/100 Inverter/Charger

(0)

₦6,412,810.00

Similar to the MultiPlus, the Quattro is also a combined inverter and charger. Additionally it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split phase operation and parallel operation.

Quantity:

Free Delivery

Nationwide shipping

Warranty

Manufacturer guarantee

Expert Support

Installation & maintenance

  • Description
  • Features
  • Specifications
  • Reviews

Description

    • Multifunctional

    Similar to the MultiPlus, the Quattro is also a combined inverter and charger. Additionally, it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple systems integration features such as three or split-phase operation and parallel operation.

    • Two AC Inputs & two AC Outputs

    The Quattro can be connected to two independent AC sources, for example, shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is life only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.

    • Unique PowerAssist feature

    The Quattro will prevent the overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shoreside supply with power taken from the battery.

    • Virtually unlimited power thanks to parallel operation

    Up to 6 Quattros can operate in parallel to achieve higher power output. Three-phase or split-phase operation is also possible. Please check our datasheets to see which models have parallel, three-phase, and split-phase capabilities.

    • Remote Monitoring and Control

    Monitor and control your Quattro and system or systems locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop, or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Quattro to setting a Geofence for-hire vehicles and more…

Key Features

No features available for this product.

Technical Specifications

No specifications available for this product.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Victron Energy Quattro 48V/15000VA/200-100/100 Inverter/Charger”

Your email address will not be published. Required fields are marked *

Please log in to write a review. You must purchase this product to leave a review.

AI-Powered Recommendations

Customers who viewed this item also loved these

Fronius Symo 20.0-3-M Solar Inverter
Fronius
Add to Cart
(0)

Fronius Symo 20.0-3-M Solar Inverter

MAXIMUM FLEXIBILITY FOR THE APPLICATIONS OF TOMORROW.

With power categories ranging from 3.0 to 27.0 kW, the transformer less Fronius Symo is the three-phase inverter for every system size. Owing to the SuperFlex Design, the Fronius Symo is the perfect answer to irregularly shaped or different roof orientations. A WLAN or Ethernet internet connection as standard plus easy integration of third-party components make the Fronius Symo one of the most communicative inverters on the market. Furthermore, the meter interface permits dynamic feed-in management and a clear visualisation of consumption.

₦6,414,110
Sungrow SH10RS Residential Hybrid Single Phase Inverter
Sungrow
Add to Cart
(0)

Sungrow SH10RS Residential Hybrid Single Phase Inverter

FULL BACKUP

  • Built-in 63 A bypass for whole home backup
  • 10 ms seamless switch
  • Peak output up to 13680 VA (10 s) in backup mode

FLEXIBLE APPLICATION

  • Up to 200 % PV input with 4 MPPTs
  • 50 A fast charge / discharge current
  • VPP ready

FRIENDLY INSTALLATION

  • Plug & Play installation
  • Free online monitoring to enhance energy management

SAFE AND DURABLE

  • Support precise AFCI
  • IP65/C5
₦3,396,949
Grundfos SQFlex 3A-10 Solar Submersible Pump
Grundfos
Add to Cart
(0)

Grundfos SQFlex 3A-10 Solar Submersible Pump

SQF 3A-10

The 4″ SQF centrifugal pump is for low heads and large flow rates.

The SQFlex system is a reliable water supply system based on renewable energy sources, such as solar and wind energy. Thanks to its flexible energy supply and performance, the SQFlex system can be combined and adapted to meet any need on the installation site.

The SQFlex system has a wide voltage range, built-in maximum power point tracking (MPPT) as well as dry-running, voltage and overload protection.

LIQUID:
Pumped liquid: Water
Liquid max temp: 40 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³

TECHNICAL:
Approvals: CE,EAC,CN RoHS Exempt,Morocco
Zinc Anodes: NO

MATERIALS:
Pump: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Impeller: Stainless steel
DIN W.-Nr. 1.4301
AISI 304

INSTALLATION:
Maximum ambient pressure: 15 bar
Pump outlet: Rp 1 1/4
Minimum borehole diameter: 104 mm

ELECTRICAL DATA:
Motor type: MSF3
Power input – P1: 1.4 kW
Rated voltage ac: 1 x 90-240 V
Rated voltage dc: 30-300 V
Rated current: 8.4 A
Power factor: 1.0
Rated speed: 3600 rpm
Start. method: direct-on-line
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of cable: 2 m
Motor No: 96275336
Udc: 300 V
30 V

OTHERS:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 9.8 kg
Gross weight: 10.9 kg
Shipping volume: 0.028 m³
Country of origin: MX
Custom tariff no.: 84137029

 

₦1,700,000
Schneider Electric Conext Battery Monitor
Schneider Electric
Add to Cart
(0)

Schneider Electric Conext Battery Monitor

Conext Battery Monitor indicates hours of battery-based runtime and determines battery bank state of charge. Conext Battery Monitor shares key battery bank parameters with Conext XW Pro or XW+ inverter/chargers improving the overall system performance of 24V and 48V battery banks. Detecting battery string imbalance is determined using innovative mid-point sensing technology providing time to address the issue before performance is significantly impacted.

Why Choose Conext Battery Monitor

Higher Return on Investment

  • Get the most out of battery based Conext inverter/charger systems
  • Cleary understand hours of available battery based autonomy
  • Detect imbalance between battery-strings before it becomes an issue

Designed for Reliability

  • Extensive quality and reliability testing
  • Highly Accelerated Life Testing (HALT)

Flexible

  • Stand-alone application or integration with Conext XW Pro or XW+ inverter/charger systems
  • Enables State of Charge triggers for AGS module control of diesel generators
  • Enables balancing of multi-battery bank systems for large clustered Conext XW+ inverter charger systems

Easy to Service

  • Remotely monitor, troubleshoot or upgrade firmware with InsightHome, InsightFacility
  • Built-in data logger

Easy to Install

  • Wall-mount, DIN-rail mount, panel mount
  • RJ45 connections for XanBus network and battery signals
  • Configure with front-panel buttons, InsightHome, InsightFacility or RS485 Modbus
₦1,451,769