Back to Products
Solis S6-EH1P8K-L-PLUS Series 8 kW Hybrid Inverter
Solis S6-EH1P8K-L-PLUS Series 8 kW Hybrid Inverter - Image 2
Solis S6-EH1P8K-L-PLUS Series 8 kW Hybrid Inverter - Image 3
Solis S6-EH1P8K-L-PLUS Series 8 kW Hybrid Inverter - Image 4
Solis S6-EH1P8K-L-PLUS Series 8 kW Hybrid Inverter - Image 5

Solis S6-EH1P8K-L-PLUS Series 8 kW Hybrid Inverter

(0)

₦2,252,750.00

Quantity:

Free Delivery

Nationwide shipping

Warranty

Manufacturer guarantee

Expert Support

Installation & maintenance

  • Description
  • Features
  • Specifications
  • Reviews

Description

S6-EH1P8K-L-PLUS series energy storage inverter is suitable for residential PV energy storage systems, supports up to 32A MPPT current input, suitable for various high power PV panels; 6-stage timed charge and discharge function, integrated battery treatment and protection functions, more friendly to batteries. And can support multiple inverters in parallel to form a single-phase or three-phase system with a maximum power of 48kW. With UPS switching, provides an independent generator interface to make energy applications more reliable. The product provides solutions for demanding power scenarios with residential energy storage systems.

Single Phase Low Voltage Energy Storage Inverter

Leading Features

  • 10 seconds of 200% overload capability
  • Multiple inverters can operate together to form a microgrid
  • Generator-compatible to extend backup duration during grid power outage
  • Supports dual backup ports for intelligent control of critical and non-critical loads
  • Automatic switchover time is <4ms, providing seamless transitions from grid to backup
  • Ensures excellent power supply stability, keeping the load unaffected by a weak grid or generator supply fluctuations

Key Features

No features available for this product.

Technical Specifications

No specifications available for this product.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Solis S6-EH1P8K-L-PLUS Series 8 kW Hybrid Inverter”

Your email address will not be published. Required fields are marked *

Please log in to write a review. You must purchase this product to leave a review.

AI-Powered Recommendations

Customers who viewed this item also loved these

Grundfos SQFlex 3A-10 Solar Submersible Pump
Grundfos
Add to Cart
(0)

Grundfos SQFlex 3A-10 Solar Submersible Pump

SQF 3A-10

The 4″ SQF centrifugal pump is for low heads and large flow rates.

The SQFlex system is a reliable water supply system based on renewable energy sources, such as solar and wind energy. Thanks to its flexible energy supply and performance, the SQFlex system can be combined and adapted to meet any need on the installation site.

The SQFlex system has a wide voltage range, built-in maximum power point tracking (MPPT) as well as dry-running, voltage and overload protection.

LIQUID:
Pumped liquid: Water
Liquid max temp: 40 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³

TECHNICAL:
Approvals: CE,EAC,CN RoHS Exempt,Morocco
Zinc Anodes: NO

MATERIALS:
Pump: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Impeller: Stainless steel
DIN W.-Nr. 1.4301
AISI 304

INSTALLATION:
Maximum ambient pressure: 15 bar
Pump outlet: Rp 1 1/4
Minimum borehole diameter: 104 mm

ELECTRICAL DATA:
Motor type: MSF3
Power input – P1: 1.4 kW
Rated voltage ac: 1 x 90-240 V
Rated voltage dc: 30-300 V
Rated current: 8.4 A
Power factor: 1.0
Rated speed: 3600 rpm
Start. method: direct-on-line
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of cable: 2 m
Motor No: 96275336
Udc: 300 V
30 V

OTHERS:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 9.8 kg
Gross weight: 10.9 kg
Shipping volume: 0.028 m³
Country of origin: MX
Custom tariff no.: 84137029

 

₦1,700,000
Victron Energy VE.Direct Cable
Victron Energy
Add to Cart
(0)

Victron Energy VE.Direct Cable

The VE.Direct cable is available in different lengths. There is a straight and 90-degree angle model.

₦31,200
Victron Energy SmartSolar MPPT RS 450/100-Tr Solar Charge Controller
Victron Energy
Add to Cart
(0)

Victron Energy SmartSolar MPPT RS 450/100-Tr Solar Charge Controller

The SmartSolar MPPT RS solar charge controllers are Victron’s solution for systems with large series-connected PV arrays charging 48 V DC battery banks. This product is perfect for large off-grid, and grid-connected battery systems.

Available in a 5.76kW and 11.52kW model, features include a wide 80-450 VDC operating solar voltage input, independent tracking inputs, full connectivity, isolated PV connections, display screen, and fully programmable battery charging parameters and active cooling. The new metal case design and fully covered electrical connections improve the safety and modernize the presentation in line with the latest suite of Victron products.

MPPT: Ultra Fast Maximum Power Point Tracking

The SmartSolar RS solar charge controller connects to a PV array of between 80 and 450 Volt Voc and will efficiently charge your 48V battery bank with either 100A or 200A.

The charge settings are fully programmable and can be set up for different battery chemistries, like lead-acid, lithium, and more.

Setup and monitor with VictronConnect

The SmartSolar RS charge controller can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, historical data and trends.

Daisy Chain Additional Units

The SmartSolar RS charge controller is equipped with VE.Can bus ports. This allows for communication with additional SmartSolar RS & VE.Can MPPT units. The additional units are simply “daisy-chained” to each other with an RJ45 cable.

When connected to each other, all individual charge controllers will synchronize their charge stages. They can also send their data, via the same cable, for monitoring to a GX device (such as the Cerbo GX).

Remote Monitoring and Control

If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your SmartSolar RS charge controllers.

If your installation is connected to a GX device and the internet, Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; for free.

For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the  GlobalLink 520.

SmartSolar Display

The SmartSolar RS charge controller is equipped with a display on the front panel. The display reads battery volts, charge current and voltages from both array’s individually including instantaneous and total figures and unit status including any possible error codes.

I/O Connections

The SmartSolar RS charge controller is equipped with a programmable relay and options for remote temperature and voltage sensing. The remote input can accept the Victron smallBMS and other types of BMS with allow-to-charge signals.

₦1,926,822
WECO 5K3 XP Dual Voltage Lithium Battery
WECO Battery
Add to Cart
(0)

WECO 5K3 XP Dual Voltage Lithium Battery

The 5K3 XP is the most advanced Lithium Module for Home and Industrial Energy Storage systems. One product suitable for two applications LV and HV. Fast connections. Wall Mounted, floor mounted, Stackable, serial or parallel application. High Capacity thanks to expandible and simple configuration. Wireless monitoring for real time intervention and maintenance.

LOW VOLTAGE AND HIGH VOLTAGE

SINGLE MODULE:

Battery System Capacity (kWh) 5.2
Single Module Nominal Voltage (V) 52
Application  Dual Voltage LV/HV
Expandability  HV Mode: Max 16 Modules in Series with Single HV Box = One HV Cluster
LV Mode: Max 8 Modules in Parallel without WeHub = One LV Cluster
Cluster Net Capacity  Max 144 Modules per HV System / Max 100 Modules per LV System
Voltage Range (V) 48.5 – 1000
Cell Capacity (Ah) 105
Usable Capacity (Ah)  100
Dimension (WxDxH mm) 580x463x156
Weight (Kg) 52
Charge / Discharge Current (A) 110
Step 01 160 (60 sec)
Peak 200 (Peak 5 sec)
DOD% (Up to)  100%
Communication Port RS485, CAN, 232, Wi-Fi
Single string quantity(pcs) 16
Discharge Temperature /°c* -20 ~ 55
Charge Temperature /°c* -10 ~ 55
Shelf Temperature/°c -10 ~ 50
Humidity 5%~95%
Altitude (m) <3000
Design life 15 Years (25°c)
Cycle Life >7000, 25°c
Authentication Level IEC62619/UL1973 CE/UN38.3
Features Pre-Charge+Fuse LV+ Fuse HV+ Auto Contactor + Dual BMS+ Multi BMS FW management
 Applicability for Low Voltage and High Voltage systems, four protections levels with HV BOX, real time balancing, Adaptive charge /discharge CAN logic, 3 steps adaptive charging logic, 2xDI/DO programmable, Mobile APP for monitoring and remote control, update, debug, data save.

 

 

₦2,205,125