Canadian Solar 665 Watts BiHiKu7 Super High Power Mono PERC Module
₦130.62
MORE POWER
- Module power up to 670 W
- Module efficiency up to 21.6 %
- Up to 3.5 % lower LCOE
- Up to 5.7 % lower system cost
- Comprehensive LID / LeTID mitigation technology, up to 50% lower degradation
- Better shading tolerance
MORE RELIABLE
- 40 °C lower hot spot temperature, greatly reduce module failure rate
- Minimizes micro-crack impacts
- Heavy snow load up to 5400 Pa, wind load up to 2400 Pa*
Free Delivery
Nationwide shipping
Warranty
Manufacturer guarantee
Expert Support
Installation & maintenance
- Description
- Features
- Specifications
- Reviews
Description
MORE POWER
- Module power up to 670 W
- Module efficiency up to 21.6 %
- Up to 3.5 % lower LCOE
- Up to 5.7 % lower system cost
- Comprehensive LID / LeTID mitigation technology, up to 50% lower degradation
- Better shading tolerance
MORE RELIABLE
- 40 °C lower hot spot temperature, greatly reduce module failure rate
- Minimizes micro-crack impacts
- Heavy snow load up to 5400 Pa, wind load up to 2400 Pa*
ELECTRICAL DATA | STC
- Nominal Max. Power (Pmax): 665 W
- Opt. Operating Voltage (Vmp): 38.5 V
- Opt. Operating Current (Imp): 17.28 A
- Open Circuit Voltage (Voc): 45.6 V
- Short Circuit Current (Isc): 18.51 A
- Module Efficiency: 21.4%
- Operating Temperature: -40°C ~ +85°C
- Max. System Voltage: 1500V (IEC/UL) or 1000V (IEC/UL)
- Module Fire Performance: TYPE 1 (UL 61730 1500V) or TYPE 2 (UL 61730 1000V) or CLASS C (IEC 61730)
- Max. Series Fuse Rating: 35 A
- Application Classification: Class A
- Power Tolerance: 0 ~ + 10 W
MECHANICAL DATA
- Cell Type: Mono-crystalline
- Cell Arrangement: 132 [2 x (11 x 6) ]
- Dimensions: 2384 ˣ 1303 ˣ 35 mm (93.9 ˣ 51.3 ˣ 1.38 in)
- Weight: 37.9 kg (83.6 lbs)
- Front Cover: 3.2 mm tempered glass
- Frame: Anodized aluminium alloy, crossbar enhanced
- J-Box: IP68, 3 bypass diodes
- Cable: 4 mm2 (IEC), 10 AWG (UL)
- Cable Length (Including Connector): 460 mm (18.1 in) (+) / 340 mm (13.4 in) (-) (supply additional jumper cable: 2 lines / Pallet) or customized length*
- Connector: T4 series or MC4-EVO2
- Per Pallet: 31 pieces
- Per Container (40′ HQ): 527 pieces
Key Features
No features available for this product.
Technical Specifications
No specifications available for this product.
Customer Reviews
AI-Powered Recommendations
Customers who viewed this item also loved these
Victron Energy SmartSolar MPPT 250/85-Tr VE.Can Solar Charge Controller
-
Solar charge controller
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery bank.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
-
MPPT: Ultra Fast Maximum Power Point Tracking
The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.
The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.
-
Control Your Charger Remotely
The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.
-
Daisy Chain Additional Units
The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy-chained” to each other with a single RJ45 cable between the individual units.
When connected to each other, all individual VE.Can SmartSolar chargers, will synchronize their charge stages. They can also send their data, via a single cable, to a GX monitoring device.
-
Remote Monitoring and Control
If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).
For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520.
- SmartSolar Control Display
The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device.
Reviews
There are no reviews yet.