Back to Products

Victron Energy SmartShunt 2000A

(0)

₦557,865.00

Quantity:

Free Delivery

Nationwide shipping

Warranty

Manufacturer guarantee

Expert Support

Installation & maintenance

  • Description
  • Features
  • Specifications
  • Reviews

Description

The SmartShunt is an all-in-one battery monitor, only without a display. Your phone acts as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.

Alternatively, the SmartShunt can be connected and read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.

The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for monitoring a second battery, midpoint monitoring, or a temperature sensor.

Models:

IP21: 500A, 1000A, 2000A – IP65: 500A, 1000A, 2000A

Key Features

No features available for this product.

Technical Specifications

No specifications available for this product.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Victron Energy SmartShunt 2000A”

Your email address will not be published. Required fields are marked *

Please log in to write a review. You must purchase this product to leave a review.

AI-Powered Recommendations

Customers who viewed this item also loved these

Canadian Solar 605 Watts HiKu7 Super High Power Mono PERC Module
Canadian Solar
Add to Cart
(0)

Canadian Solar 605 Watts HiKu7 Super High Power Mono PERC Module

MORE POWER

  • Module efficiency up to 21.4 %
  • Up to 3.5 % lower LCOE
  • Up to 5.7 % lower system cost
  • Comprehensive LID / LeTID mitigation technology, up to 50% lower degradation
  • Compatible with mainstream trackers, cost-effective product for utility power plant
  • Better shading tolerance

MORE RELIABLE

  • Minimizes micro-crack impacts
  • 40 °C lower hot spot temperature, greatly reduces module failure rate
  • Heavy snow load up to 5400 Pa, enhanced wind load up to 2400 Pa
  • 12 years Enhanced Product Warranty on Materials and Workmanship
  • 25 years Linear Power Performance Warranty

ELECTRICAL DATA | STC

  • Nominal Max. Power (Pmax): 605 W
  • Opt. Operating Voltage (Vmp): 35.1 V
  • Opt. Operating Current (Imp): 17.25 A
  • Open Circuit Voltage (Voc): 41.5 V
  • Short Circuit Current (Isc): 18.52 A
  • Module Efficiency: 21.4%
  • Operating Temperature: -40°C ~ +85°C
  • Max. System Voltage: 1500V (IEC/UL) or 1000V (IEC/UL)
  • Module Fire Performance: TYPE 1 (UL 61730 1500V) or TYPE 2 (UL 61730 1000V) or CLASS C (IEC 61730)
  • Max. Series Fuse Rating: 30 A
  • Application Classification: Class A
  • Power Tolerance: 0 ~ + 5 W

MECHANICAL DATA

  • Cell Type: Mono-crystalline
  • Cell Arrangement: 120 [2 x (10 x 6)]
  • Dimensions: 2172 ˣ 1303 ˣ 35 mm(85.5 ˣ 51.3 ˣ 1.38 in)
  • Weight: 31.4 kg (69.2 lbs)
  • Front Cover: 3.2 mm tempered glass
  • Frame: Anodized aluminium alloy
  • J-Box: IP68, 3 bypass diodes
  • Cable: 4 mm2 (IEC), 12 AWG (UL)
  • Cable Length (Including Connector): 460 mm (18.1 in) (+) / 340 mm (13.4in) (-) or customized length
  • Connector: T4 series or H4 UTX or MC4-EVO2
₦181,500
SUNPAD Solar Water Heater
SUNPAD
Add to Cart
(0)

SUNPAD Solar Water Heater

INNOVATIVE COMPLETE SYSTEM

SUNPAD all-in-one-compact solar water heater Africa delivers fresh water with high performance.  The innovative concept convinces with a unique design for aesthetic roof integration.

COST AND ENERGY-EFFICIENT

SUNPAD stands for excellent performance at a low-cost price and a short payback period. Furthermore, optimized packaging ensures reduced transport costs.

FLEXIBLE AND USER-FRIENDLY

Designed as a plug-and-play system SUNPAD is fast and easy to install. Its lightweight structure for easy handling is suitable for flat or pitched roof mounting.

 

TECHNICAL DATA

Gross area / net area 2.05 m2 / 1.68 m2
L x W x H 2.220 mm x 920 mm x 198 mm
Weight heater empty 62 kg (single AR glass)
Collector housing EPP with UV protection cover
Bird protection click-on aluminum frame
Absorber Steel, selective coated
Absorption 91 %
Connections ¾”, customized possible
SUNPAD E 1 kW heat rod
Thermal insulation 0.036 W/mK
Buffer tank capacity 150 liters of technical water
Domestic freshwater output up to 380 liters hot water mixed with 40°
Volume heat exchanger 9. 2 liters
Material heat exchanger
Optional:		 Stainless steel 1.4404 AISI 316L
Stainless steel 1.4539 AISI 904L
Compressive strength heat exchanger 10 bar
Storage material Steel ST235
₦3,173,370
DEYE 20 kW Three Phase 2 MPPT Hybrid Inverter
DEYE
Add to Cart
(0)

DEYE 20 kW Three Phase 2 MPPT Hybrid Inverter

Higher yields / Safe & Reliable / Smart / User-friendly

SUN-20K-SG05LP3-EU-SM2 is a brand new three-phase hybrid inverter with a low-voltage battery, ensuring the system is safe and reliable. With a compact design and high-power density, this series supports a 1.3 DC/AC ratio, saving device investment. It supports a three-phase unbalanced output, extending the application scenarios. Equipped with CAN port (x2) BMS and parallel, x1 RS485 port for BMS, x1 RS232 port for remote control, and x1 DRM port, which makes the system smart and flexible.

It is equipped with RS485 / CAN port for battery communication.

Remotely shutdown function

Smart Monitoring Platform
Thanks to the smart monitoring platform, Deye full series inverter products support remote shutdown immediately when an accident occurs. Setting parameters and FW updates remotely, which makes PV plant O&M easier.

Key Features

  • 100% unbalanced output, each phase; Max. output up to 50% rated power
  • AC couple to retrofit existing solar system
  • Max. 10 pcs parallel for on-grid and off-grid operation; Support multiple batteries parallel
  • Max. charging/discharging current of 350A
  • Support storing energy from diesel generator
  • 48V low voltage battery, transformer isolation design
  • 6 time periods for battery charging/discharging

Technical Specifications

Model SUN-14K-SG05LP3
-EU-SM2		 SUN-15K-SG05LP3
-EU-SM2		 SUN-16K-SG05LP3
-EU-SM2		 SUN-18K-SG05LP3
-EU-SM2		 SUN-20K-SG05LP3
-EU-SM2
Battery Input Data
Battery Type Lead-acid or Lithium-ion
Battery Voltage Range (V) 40-60
Max. Charging Current (A) 260 280 300 330 350
Max. Discharging Current (A) 260 280 300 330 350
Charging Strategy for Li-ion Battery Self-adaption to BMS
Number of Battery Input 1
PV String Input Data
Max. PV Access Power (W)
 28000 30000 32000 36000 40000
Max. DC Input Power (W) 22400 24000 25600 28800 32000
Max. DC Input Voltage (V) 800
Start-up Voltage (V) 160
MPPT Voltage Range (V) 160-650
Rated DC Input Voltage (V) 550
Max. Operating PV Input Current (A) 36+36
Max. Input Short-Circuit Current (A) 54+54
No. of MPPT Trackers/
No. of String Per MPPT Tracker		 2/2+2
AC Input/Output Data
Rated AC Input/Output Active Power (W) 14000 15000 16000 18000 20000
Max. AC Input/Output Apparent Power (VA) 15400 16500 17600 19800 22000
Rated AC Input/Output Current (A) 21.3/20.3 22.8/21.8 24.3/23.2 27.3/26.1 30.4/29
Max. AC Input/Output Current (A) 23.4/22.4 25/24 26.7/25.6 30/28.7 33.4/31.9
Max. Continuous AC Passthrough (grid to load) (A) 70
Peak Power (off-grid) (W) 2 times of rated power, 10s
Power Factor Adjustment Range 0.8 leading to 0.8 lagging
Rated Input/Output Voltage/Range (V) 220/380V, 230/400V 0.85Un-1.1Un
Rated Input/Output Grid Frequency/Range (Hz) 50/45-55, 60/55-65
Grid Connection Form 3L+N+PE
Total Current Harmonic Distortion THDi <3% (of nominal power)
DC Component of Grid <0.5% In
Efficiency
Max. Efficiency 97.6%
Euro Efficiency 97.0%
MPPT Efficiency >99%
Equipment Protection
Integrated
DC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, Thermal Protection,
AC Output Overvoltage Protection, AC Output Short Circuit Protection, DC Component Monitoring,
Overvoltage Load Drop Protection, Ground Fault Current Monitoring, Arc Fault Circuit Interrupter (optional),
Power Network Monitoring, Island Protection Monitoring, Earth Fault Detection, DC Input Switch,
DC Terminal Insulation Impedance Monitoring, Residual Current (RCD) Detection, Surge protection level
Surge Protection Level TYPE II(DC), TYPE II (AC)
Interface
Communication Interface RS485/RS232/CAN
Monitor Mode
GPRS/WIFI/Bluetooth/4G/LAN (optional)
General Data
Operating Temperature Range (℃) -40 to +60℃, >45℃ Derating
Permissible Ambient Humidity 0-100%
Permissible Altitude 3000m
Noise ≤60
Ingress Protection (IP) Rating IP 65
Inverter Topology Non-Isolated
Over Voltage Category OVC II(DC), OVC III(AC)
Cabinet Size (WxHxD mm) 456×750×268.5 (Excluding Connectors and Brackets)
Weight (kg) 51.9
Type of Cooling Intelligent Air Cooling
Warranty 5 Years/10 Years
the Warranty Period Depends the Final Installation Site of Inverter, More Info Please Refer to Warranty Policy
Grid Regulation IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002,
OVE-Richline R25, G99, VDE-AR-N 4105
Safety / EMC Standard IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2

 

₦4,790,000
DEYE 18 kW Single Phase 3 MPPT Hybrid Inverter
Sale
Add to Cart
(0)

DEYE 18 kW Single Phase 3 MPPT Hybrid Inverter

DEYE 18 kW Single Phase 3 MPPT Hybrid Inverter – SUN-12/14/16/18K-SG01LP1-EU-AM3-P
Single Phase Hybrid Inverter | 12-18 kW | 3 MPPT | LV Battery Supported

₦4,748,000