Back to Products

Outback Power VFXR3048E 3000W, 48V Inerter/Charger

Outback Power

Outback Power VFXR3048E 3000W, 48V Inerter/Charger

(0)

₦3,516,000.00

Modular, stackable: up to nine units can be combined for three-phase operation and ten in parallel, single phase operation.
Seven different programmable operating modes, with generator assist.
GridZero operating mode minimizes grid dependence in areas where incentives are changing and utility sell back is limited.
Sinewave output in 12V, 24V or 48V versions with a typical operating efficiency up to 93%.

Free Delivery

Nationwide shipping

Warranty

Manufacturer guarantee

Expert Support

Installation & maintenance

Description
Features
Specifications
Reviews

Description

The latest, most advanced features on the industry’s most trusted and proven platform—that’s the essence of OutBack’s new FXR Series of Grid/Hybrid inverter/chargers. Capable of off-grid or grid-connected operation in a single model, the FXR Grid/Hybrid inverter/chargers provide system designers with unprecedented flexibility and compatibility for nearly any power conversion scenario.

The new FXR features and technologies on the acclaimed FX platform include:

Both off-grid and grid-tied functionality in one unit
Seven programmable modes, including GridZero and Support Mode and built-in networked communications
Advanced Battery Charging (ABC) with expanded charging voltages and time parameters, enabling system designers to accommodate the specific charging profiles and algorithms of new and emerging energy storage technologies including Lithium Ion, Aqueous Ion and Flow chemistry batteries
Easy system upgradability in the field

FXR inverter/chargers can be paired with a MATE3s remote to add OPTICS RE to remotely monitor and control system performance from any location. Available in power ranges from 2000W-3600W, multiple units may be stacked and connected with other OutBack Power electronics for more seamless system integration and the ability to function in a wide variety of applications, and system sizes. Up to nine inverters can be combined in a 3-phase system with the 12V, 24V or 48V models, and up to 36kW in a grid-tied 24V or 48V system. The exclusive modular system architecture means that increased power output is just an additional FXR inverter/charger away.

Available in sealed or vented units with NEMA type 1 die-cast aluminum chassis designed to operate in the harshest environmental conditions such as high temperatures, humidity or corrosive salt air, the FXR’s continue in OutBack’s tradition of absolute dependability in mission critical installations no matter how harsh or challenging the conditions.

Features:

Dimensions (LxWxH): 16.25 × 8.25 × 12 inches
Weight: 28 kg
Single-phase, 230V Sinewave Output
Programmable for Seven Different Modes with Generator Assist
Modular, Stackable Design for up to Nine Inverters in Three-phase and 10 Inverters in Grid-tied
Up to 93% Operating Efficiency
Field Upgradable Software
Standard 5-Year Warranty with Optional 10-Year Upgrade

Key Features

No features available for this product.

Technical Specifications

No specifications available for this product.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Outback Power VFXR3048E 3000W, 48V Inerter/Charger”

Please log in to write a review. You must purchase this product to leave a review.

AI-Powered Recommendations

Customers who viewed this item also loved these

Schneider Electric

Add to Cart

(0)

Schneider Electric Homaya Pro Solar Hybrid Inverter 6kW 48V

About Homaya Pro

Homaya Pro is a solar-hybrid solution specifically designed for locations having unreliable or no access to electricity. It provides customizable, reliable, and renewable energy access for homes, fuel stations, small offices, healthcare centers, educational institutions, and telecom towers. Homaya Pro is powered from solar with an inbuilt MPPT controller, compatible with grid charging, and supports Lead acid or LFP battery technology.

Facts about Homaya Pro

Product specifications

Supports 9 profiles of lead acid battery charging.
Inbuilt Maximum Power Point Tracking charging mode.
Robust transformer-based design.
Supports productive needs including domestic pumping solution.
Connect inverters in parallel to support loads up to 24 kW (compatible with 4kW and 6kW Hybrid Pro inverters)
Compatible with external MPPT chargers, each 1 kWp input (Compatible with 3kW Hybrid Pro Inverter) and 3kWp input (Compatible with 4kW and 6kW Hybrid Pro Inverters).
Compatible with LFP and customizable lead acid charging profile.
Smart autosensing of 50 or 60 Hz grid compatibility and Selectable when connected off-grid.
Easy monitoring using local WiFi-connected mobile phone, no internet needed.
Supports multi-unit operation for loads up to 24 kW (compatible with 4kW and 6kW Hybrid Pro inverters)

Features

Upgrade the off-grid backup time with an additional solar panel array.
Monitor the inverter with local WiFi and without internet connectivity.
Harvest the maximum power from the sun.
Wide grid operating voltage range.
Efficient battery charging.
Intuitive LCD display for monitoring and programming.
Last mile customization of different lead acid batteries and LFP charging profiles.
Easy to use and install.
Environment friendly.

₦1,379,058

Canadian Solar

Add to Cart

(0)

Canadian Solar 665 Watts BiHiKu7 Super High Power Mono PERC Module

MORE POWER

Module power up to 670 W
Module efficiency up to 21.6 %
Up to 3.5 % lower LCOE
Up to 5.7 % lower system cost
Comprehensive LID / LeTID mitigation technology, up to 50% lower degradation
Better shading tolerance

MORE RELIABLE

40 °C lower hot spot temperature, greatly reduce module failure rate
Minimizes micro-crack impacts
Heavy snow load up to 5400 Pa, wind load up to 2400 Pa*

ELECTRICAL DATA | STC

Nominal Max. Power (Pmax): 665 W
Opt. Operating Voltage (Vmp): 38.5 V
Opt. Operating Current (Imp): 17.28 A
Open Circuit Voltage (Voc): 45.6 V
Short Circuit Current (Isc): 18.51 A
Module Efficiency: 21.4%
Operating Temperature: -40°C ~ +85°C
Max. System Voltage: 1500V (IEC/UL) or 1000V (IEC/UL)
Module Fire Performance: TYPE 1 (UL 61730 1500V) or TYPE 2 (UL 61730 1000V) or CLASS C (IEC 61730)
Max. Series Fuse Rating: 35 A
Application Classification: Class A
Power Tolerance: 0 ~ + 10 W

MECHANICAL DATA

Cell Type: Mono-crystalline
Cell Arrangement: 132 [2 x (11 x 6) ]
Dimensions: 2384 ˣ 1303 ˣ 35 mm (93.9 ˣ 51.3 ˣ 1.38 in)
Weight: 37.9 kg (83.6 lbs)
Front Cover: 3.2 mm tempered glass
Frame: Anodized aluminium alloy, crossbar enhanced
J-Box: IP68, 3 bypass diodes
Cable: 4 mm2 (IEC), 10 AWG (UL)
Cable Length (Including Connector): 460 mm (18.1 in) (+) / 340 mm (13.4 in) (-) (supply additional jumper cable: 2 lines / Pallet) or customized length*
Connector: T4 series or MC4-EVO2
Per Pallet: 31 pieces
Per Container (40′ HQ): 527 pieces

₦131

Jinko Solar

Add to Cart

(0)

Jinko Solar Tiger Neo N-type 72HL4-(V) 550 Watts Mono-Facial Module

Specification | STC

Module Type: JKM550N-72HL4-V
Maximum Power (Pmax): 550Wp
Maximum Power Voltage (Vmp): 41.64V
Maximum Power Current (Imp): 13.33A
Open-circuit Voltage (Voc): 50.34V
Short-circuit Current (Isc): 14.07A
Module Efficiency STC (%): 21.48%
Operating Temperature (℃): -40℃~+85℃
Maximum system voltage: 1000/1500VDC (IEC)
Maximum series fuse rating: 25A
Power tolerance: 0~+3%
Temperature coefficients of Pmax: -0.35%/℃
Temperature coefficients of Voc: -0.28%/℃
Temperature coefficients of Isc: 0.048%/℃
Nominal operating cell temperature (NOCT): 45±2℃

Mechanical Characteristics

Cell Type: N type Mono-crystalline
No. of cells: 144 (6×24)
Dimensions: 2278×1134×35mm (89.69×44.65×1.38 inch)
Weight: 28.9 kg (61.73 lbs)
Front Glass: 3.2mm, Anti-Reflection Coating, High Transmission, Low Iron, Tempered Glass
Frame: Anodized Aluminium Alloy
Junction Box: IP68 Rated
Output Cables: TUV 1×4.0mm2 (+): 400mm , (-): 200mm or Customized Length

₦148,500

GoodWe

Add to Cart

(0)

GoodWe GW50KS-MT 50 kW 3 Phase 5 MPPT String Inverter

The GoodWe SMT Series three-phase inverter is ideal for commercial rooftop system solutions. The SMT series achieves maximum efficiency of 98.8% and features unique design highlights, including solid capacitors, fuse-free design, and optional Arc Fault Circuit Interrupter (AFCI) function. These new features ensure a longer lifespan and a higher safety level of operation, allowing for an improved user experience. With a compact design and weight of just 40 kg, the SMT series is more convenient to install. With a maximum DC input voltage of 1100V, a wider MPPT range for complex rooftops, and a start-up voltage of 180V, the SMT series guarantees an earlier generation of power and a longer working time to maximize long-term returns and profitability in safe operating conditions.

Superb Safety & Reliability

Both the DC side and AC side are equipped with optional Type II surge protection to protect the inverter from lightning, providing upgraded safety and reliability for the PV system. With optional Arc Fault Circuit Interrupter (AFCI), the inverter is able to detect arc fault failure, sending alarms through monitoring systems and breaking the circuit simultaneously.

Friendly & Thoughtful Design

With the optional integrated PLC technology, SMT 25-36kW Series strives for cost efficient communications. Featuring a compact design with a weight of just 40 kg and compact design, the inverter is exceptionally easy to handle.

Optimal Generation for Higher Return

SMT is designed to meet the increasing demand for 182mm and 210mm high power modules. With large current input and 130% DC oversizing and 110% AC overloading capacity, the system efficiency is enormously enhanced. Wide MPPT Range enables the solar system to start at an early stage, fully utilizing the daytime to maximize solar powered energy generation, giving the highest yield.

₦5,748,252