The SmartSolar MPPT RS solar charge controllers are Victron’s solution for systems with large series-connected PV arrays charging 48 V DC battery banks. This product is perfect for large off-grid, and grid-connected battery systems.

Available in a 5.76kW and 11.52kW model, features include a wide 80-450 VDC operating solar voltage input, independent tracking inputs, full connectivity, isolated PV connections, display screen, and fully programmable battery charging parameters and active cooling. The new metal case design and fully covered electrical connections improve the safety and modernize the presentation in line with the latest suite of Victron products.

MPPT: Ultra Fast Maximum Power Point Tracking

The SmartSolar RS solar charge controller connects to a PV array of between 80 and 450 Volt Voc and will efficiently charge your 48V battery bank with either 100A or 200A.

The charge settings are fully programmable and can be set up for different battery chemistries, like lead-acid, lithium, and more.

Setup and monitor with VictronConnect

The SmartSolar RS charge controller can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, historical data and trends.

Daisy Chain Additional Units

The SmartSolar RS charge controller is equipped with VE.Can bus ports. This allows for communication with additional SmartSolar RS & VE.Can MPPT units. The additional units are simply “daisy-chained” to each other with an RJ45 cable.

When connected to each other, all individual charge controllers will synchronize their charge stages. They can also send their data, via the same cable, for monitoring to a GX device (such as the Cerbo GX).

Remote Monitoring and Control

If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your SmartSolar RS charge controllers.

If your installation is connected to a GX device and the internet, Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; for free.

For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the  GlobalLink 520.

SmartSolar Display

The SmartSolar RS charge controller is equipped with a display on the front panel. The display reads battery volts, charge current and voltages from both array’s individually including instantaneous and total figures and unit status including any possible error codes.

I/O Connections

The SmartSolar RS charge controller is equipped with a programmable relay and options for remote temperature and voltage sensing. The remote input can accept the Victron smallBMS and other types of BMS with allow-to-charge signals.

The Galaxy A07 is the perfect entry-level device for everyday use. It offers a large display for comfortable viewing and a reliable battery that keeps you connected without breaking the bank.

Unlock superior solar performance with the JA Solar 605W N-Type Bifacial Double Glass Solar Panel. This cutting-edge module leverages advanced N-type cell technology and a innovative bifacial design to deliver exceptional power output, even in challenging conditions.

Key Features & Benefits:

• Massive 605W Power Output: Experience significantly higher energy generation per square meter, maximizing your system’s efficiency and reducing your overall footprint.
• N-Type Cell Technology: Benefit from enhanced low-light performance, improved temperature coefficient, and reduced LID (light-induced degradation) for consistent, long-term energy production.
• Bifacial Design for Increased Yield: Capture sunlight from both the front and rear sides of the panel, generating up to 25% more energy from reflected light, particularly beneficial for ground-mounted or elevated installations.
• Double Glass Construction: Provides superior durability and resistance to micro-cracks, PID (potential induced degradation), and harsh environmental factors like salt mist, ammonia, and sand. This ensures a longer lifespan and greater reliability.
• Excellent Low Irradiance Performance: Continues to produce significant power even on cloudy days or in shaded conditions, maximizing your energy harvest throughout the year.
• High Module Efficiency: Convert more sunlight into usable electricity, leading to faster payback periods and greater return on investment.
• Reduced BOS Costs: The higher power output per module can lead to fewer panels required for your desired system size, potentially lowering balance of system (BOS) costs, including racking, wiring, and labor.
• Enhanced Safety: Double glass design offers improved fire resistance and mechanical load tolerance.
• Ideal for Diverse Applications: Perfect for residential, commercial, industrial, and utility-scale solar projects seeking maximum performance and long-term reliability.

Mechanical Parameters:

* Maximum Power (Pmax): 605W
* Cell Type: N-Type Monocrystalline
* Module Type: Bifacial Double Glass
* Dimensions: 2382 x 1134 x 30 mm
* Weight: 33.1 kg
* Operating Temperature Range: -40°C to +85°C
* Product Warranty: 12-year product warranty
* Performance Warranty: 30-year linear power output warranty
Invest in the future of solar with the JA Solar 605W N-Type Bifacial Double Glass Module – a smart choice for high efficiency, exceptional durability, and maximized energy yield.

Conext Battery Monitor indicates hours of battery-based runtime and determines battery bank state of charge. Conext Battery Monitor shares key battery bank parameters with Conext XW Pro or XW+ inverter/chargers improving the overall system performance of 24V and 48V battery banks. Detecting battery string imbalance is determined using innovative mid-point sensing technology providing time to address the issue before performance is significantly impacted.

Why Choose Conext Battery Monitor

Higher Return on Investment

• Get the most out of battery based Conext inverter/charger systems
• Cleary understand hours of available battery based autonomy
• Detect imbalance between battery-strings before it becomes an issue

Designed for Reliability

• Extensive quality and reliability testing
• Highly Accelerated Life Testing (HALT)

Flexible

• Stand-alone application or integration with Conext XW Pro or XW+ inverter/charger systems
• Enables State of Charge triggers for AGS module control of diesel generators
• Enables balancing of multi-battery bank systems for large clustered Conext XW+ inverter charger systems

Easy to Service

• Remotely monitor, troubleshoot or upgrade firmware with InsightHome, InsightFacility
• Built-in data logger

Easy to Install

• Wall-mount, DIN-rail mount, panel mount
• RJ45 connections for XanBus network and battery signals
• Configure with front-panel buttons, InsightHome, InsightFacility or RS485 Modbus