Back to Products

Victron Energy SmartSolar MPPT 250/100-Tr VE.Can Solar Charge Controller 

(0)

₦902,750.00

  • Solar charge controller

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery bank.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

Quantity:

Free Delivery

Nationwide shipping

Warranty

Manufacturer guarantee

Expert Support

Installation & maintenance

  • Description
  • Features
  • Specifications
  • Reviews

Description

  • Solar charge controller

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery bank.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

  • MPPT: Ultra Fast Maximum Power Point Tracking

The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.

The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.

  • Control Your Charger Remotely

The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.

  • Daisy Chain Additional Units

The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy-chained” to each other with a single RJ45 cable between the individual units.

When connected to each other, all individual VE.Can SmartSolar chargers, will synchronize their charge stages. They can also send their data, via a single cable, to a GX monitoring device.

  • Remote Monitoring and Control

If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).

For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the  GlobalLink 520.

  • SmartSolar Control Display

The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device.

Key Features

No features available for this product.

Technical Specifications

No specifications available for this product.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Victron Energy SmartSolar MPPT 250/100-Tr VE.Can Solar Charge Controller ”

Your email address will not be published. Required fields are marked *

Please log in to write a review. You must purchase this product to leave a review.

AI-Powered Recommendations

Customers who viewed this item also loved these

LONGi Hi-MOx6 640W Solar Panel
Add to Cart
(0)

LONGi Hi-MOx6 640W Solar Panel

₦192,000
Grundfos RSI 3×380-440V IP66 15kW 31A
Grundfos
Add to Cart
(0)

Grundfos RSI 3×380-440V IP66 15kW 31A

RSI 3×380-440V IP66 15kW 31A

Renewable Solar Inverter RSI is an off-grid solar inverter to enable end-user to use solar power for a wide range of water applications. RSI is customized specifically to be compatible with Grundfos pumps. With the built-in MPPT and various protection software, it delivers an efficient and reliable solar system solution.

 

  • 3-phase 208V, 380V or 440V
  • Quick setup wizard
  • Preconfigured inputs
  • Build-in MPPT (Maximum power point tracking)
  • AC and DC power source compatible
  • Solar solution for up to 250kW

RSI offers the following inputs and output:

  • RS-485 Modbus RTU/TCP
  • 6 Digital inputs, preconfigured for solar application
  • 2 Signal relays, RUN/FAULT

 

Technical:
Approvals and markings: CE
Installation:
Range of ambient temperature: -10 .. 60 °C
Relative humidity: 100 %
Electrical data:
Rated power – P2: 15 kW
Mains frequency: 50 / 60 Hz
Rated voltage: 3 x 380 – 440 V
Enclosure class (IEC 34-5): IP66
Rated voltage output AC: 380 V
Voltage input DC: 800 V
Rated current output AC: 31 A
Udc: 400 V
Others:
Net weight: 14.9 kg
Gross weight: 16.3 kg
₦3,450,000
Grundfos CU 202 SQFlex Control Unit
Grundfos
Add to Cart
(0)

Grundfos CU 202 SQFlex Control Unit

CU 202 is designed for monitoring and controlling SQFlex submersible pumps in solar applications.

The simple user interface and built-in Bluetooth module ensure easy installation and configuration. The Bluetooth connection to the Grundfos GO app offers extensive setup and monitoring options.

CU 202 is pre-configured for tank filling, the most used application, offering a plug-and-pump solution, which saves time on commissioning. For other applications, the controller provides several control modes, which can be easily selected and set through the Grundfos GO app. Grundfos GO makes the configuration easier and allows installers to set up high-performing systems.

CU 202 communicates with the pump through the power cable. This communication principle is called mains borne signaling or powerline communication and means that no additional cables are required to the pump.

Grundfos GO offers detailed information and logs that help the installer to find the root cause in failure situations. In addition, the controller can use Wi-Fi, GENIbus, or Modbus to monitor the system remotely either through Grundfos Connect or another SCADA system. Remote monitoring saves time when inspecting installations.

CU 202 is equipped with power and pump connections and offers 2 configurable inputs and outputs. Additionally, a backup battery can be added to the controller to maintain communication and measurements when solar power is insufficient.

The display of the controller shows:

  • System status indication
  • Alarm and warning indication

The pump can be turned on and off through the display of the controller. The controller can display a read-out of the application-related data. It is also possible to adjust the setpoint. The LEDs on the display of the controller can be set to sleep mode, for example, to avoid attracting wildlife.

The following logs are available through Grundfos GO or remote monitoring:

  • User setting log (25 entries)
  • Alarms and warnings (50 entries)
  • Installation log (filled out by the installer)
  • Historic data for different intervals (total, today, and yesterday) for:
    • Operation time
    • Number of starts
    • Energy consumption
    • Volume pumped (provided that a flow meter is connected)

CU 202 indicates warnings and alarms on the display of the controller. Additionally, the Grundfos GO app provides further information on these events including the recommended solutions.

₦629,310
DEYE 8 kW Single Phase 2 MPPT Hybrid Inverter
DEYE
Add to Cart
(0)

DEYE 8 kW Single Phase 2 MPPT Hybrid Inverter

Higher yields / Safe & Reliable / Smart / User-friendly

The series, SUN-5/6K-SG01LP1-US SUN-7.6/8K-SG01LP1-US/EU, is a single-phase low voltage (48V) hybrid inverter that enables enhanced energy independence and maximizes self-consumption through export limit feature and “time of use” function. With the frequency droop control algorithm, this series product supports single-phase and three-phase parallel applications and the Max. parallel units are up to 16 PCs.

Remotely shutdown function

Smart Monitoring Platform
Thanks to the smart monitoring platform, Deye full series inverter products support remote shutdown immediately when an accident occurs. Setting parameters and FW updates remotely makes PV plant O&M easier.

  • Colorful touch LCD, IP65 protection degree
  • 6 time periods for battery charging/discharging
  • Max. charging/discharging current of 190A.
  • Max.16pcs parallel
  • DC coupled and AC coupled to retrofit existing solar system.
  • Support storing energy from diesel generators.
  • Max. battery charge efficiency of 95.4%
  • Unique Smart Load application and Grid peak shaving function
  • 4ms fast transfer from on-grid to off-grid mode, ensuing the traditional fixed frequency air conditioner works well
  • Certified by UL, CE, IEC, VDE, NRS, VFR, AS4777.2, CEI and INMETRO, etc.

Technical Specifications

Model SUN-5K-SG01LP1-US SUN-6K-SG01LP1-US SUN-7.6K-SG01LP1-US/EU SUN-8K-SG01LP1-US/EU
Battery Input Data
Battery Type Lead-acid or Lithium-ion
Battery Voltage Range (V) 40~60V
Max. Charging Current (A) 120A 135A 190A 190A
Max. Discharging Current (A) 120A 135A 190A 190A
Charging Curve 3 Stages / Equalization
External Temperature Sensor Yes
Charging Strategy for Li-Ion Battery Self-adaption to BMS
PV String Input Data
Max. DC Input Power (W) 6500W 7800W 9880W 10400W
Rated PV Input Voltage (V) 370V(125V～500V）
Start-up Voltage (V) 125V
MPPT Range (V) 150V-425V
Full Load DC Voltage Range (V) 300V-425V 200V-425V
PV Input Current (A) 13A+13A 26A+13A 26A+26A
Max. PV ISC (A) 22A+22A 44A+22A 44A+44A
Number of MPPT Trackers 2
Number of Strings per MPPT Tracker 1 2+1 2
AC Output Data
Rated AC Output and UPS Power (W) 5000W 6000W 7600W 8000W
Max. AC Output Power (W) 5500W 6600W 8360W 8800W
Peak Power (off-grid) 2 times of rated power, 10 S
AC Output Rated Current (A) 20.8/24 25/28.8 31.7/36.5 34.5/33 33.3/38.5 36.4/34.8
Max. AC Current (A) 22.9/26.4 27.5/31.7 34.8/40.2 38/36.3 36.7/42.3 40/38.3
Max. Continuous AC Passthrough (A) 40A 50A
Output Frequency and Voltage 50 / 60Hz; L1/L2/N(PE) 120/240Vac (split phase), 208Vac (2/3 phase), 

L/N/PE 220/230Vac (single phase)
Grid Type Split phase; 2/3 phase; Single Phase
Current Harmonic Distortion THD<3% (Linear load<1.5%)
Efficiency
Max. Efficiency 97.60%
Euro Efficiency 97.00%
MPPT Efficiency 99.90%
Protection
PV Input Lightning Protection Integrated
Anti-islanding Protection Integrated
PV String Input Reverse Polarity Protection Integrated
Insulation Resistor Detection Integrated
Residual Current Monitoring Unit Integrated
Output Over Current Protection Integrated
Output Shorted Protection Integrated
Output Over Voltage Protection Integrated
Surge protection DC Type II / AC Type II
Certifications and Standards
Grid Regulation CEI 0-21, VDE-AR-N 4105, NRS 097, IEC 62116, IEC 61727, G99, G98, VDE 0126-1-1, RD 1699, C10-11
Safety EMC / Standard IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2
General Data
Operating Temperature Range (℃) -40~60℃, >45℃ Derating
Cooling Smart cooling noise
e (dB) <30 dB
Communication with BMS RS485; CAN
Weight (kg) 32
Size (mm) 420W×670H×233D
Protection Degree IP65
Installation Style Wall-mounted
Warranty 5 years
₦2,242,500