Back to Products
Canadian Solar 550 Watts HiKu6 Mono PERC Module
Canadian Solar 550 Watts HiKu6 Mono PERC Module - Image 2
Canadian Solar 550 Watts HiKu6 Mono PERC Module - Image 3

Canadian Solar 550 Watts HiKu6 Mono PERC Module

(0)

₦165,000.00

MORE POWER

  • Module efficiency up to 21.5 %
  • Up to 4.5 % lower LCOE
  • Up to 5.6 % lower system cost
  • Comprehensive LID / LeTID mitigation technology, up to 50% lower degradation
  • Compatible with mainstream trackers, cost-effective product for utility power plant
  • Better shading tolerance

Quantity:

Free Delivery

Nationwide shipping

Warranty

Manufacturer guarantee

Expert Support

Installation & maintenance

  • Description
  • Features
  • Specifications
  • Reviews

Description

MORE POWER

  • Module efficiency up to 22.5 %
  • Up to 4.5 % lower LCOE
  • Up to 5.6 % lower system cost
  • Comprehensive LID / LeTID mitigation technology, up to 50% lower degradation
  • Compatible with mainstream trackers, cost-effective product for utility power plant
  • Better shading tolerance

MORE RELIABLE

  • Minimizes micro-crack impacts
  • 40 °C lower hot spot temperature, greatly reduce module failure rate
  • Heavy snow load up to 5400 Pa, enhanced wind load up to 2400 Pa
  • 12 years Enhanced Product Warranty on Materials and Workmanship
  • 25 years Linear Power Performance Warranty

ELECTRICAL DATA | STC

  • Nominal Max. Power (Pmax): 560 W
  • Opt. Operating Voltage (Vmp): 42.3 V
  • Opt. Operating Current (Imp): 13.24 A
  • Open Circuit Voltage (Voc): 51.4 V
  • Short Circuit Current (Isc): 13.69 A
  • Module Efficiency: 21.7%
  • Operating Temperature: -40°C ~ +85°C
  • Max. System Voltage: 1500V (IEC/UL) or 1000V (IEC/UL)
  • Module Fire Performance: TYPE 1 (UL 61730 1500V) or TYPE 2 (UL 61730 1000V) or CLASS C (IEC 61730)
  • Max. Series Fuse Rating: 25 A
  • Application Classification: Class A
  • Power Tolerance: 0 ~ + 10 W

MECHANICAL DATA

  • Cell Type: Mono-crystalline
  • Cell Arrangement: 144 [2 x (12 x 6)]
  • Dimensions: 2278 ˣ 1134 ˣ 30 mm (89.7 ˣ 44.6 ˣ 1.18 in)
  • Weight: 27.6 kg (60.8 lbs)
  • Front Cover: 3.2 mm tempered glass
  • Frame: Anodized aluminium alloy
  • J-Box: IP68, 3 bypass diodes
  • Cable: 4 mm2 (IEC), 12 AWG (UL)
  • Cable Length (Including Connector): 410 mm (16.1 in) (+) / 290 mm (11.4 in) (-) (supply additional jumper cable: 2 lines / Pallet) or customized length
  • Connector: T4 series or H4 UTX or MC4-EVO2

Key Features

No features available for this product.

Technical Specifications

No specifications available for this product.

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Canadian Solar 550 Watts HiKu6 Mono PERC Module”

Your email address will not be published. Required fields are marked *

Please log in to write a review. You must purchase this product to leave a review.

AI-Powered Recommendations

Customers who viewed this item also loved these

Schneider Electric Homaya Pro Solar Hybrid Inverter 4kW 48V
Schneider Electric
Add to Cart
(0)

Schneider Electric Homaya Pro Solar Hybrid Inverter 4kW 48V

About Homaya Pro

Homaya Pro is a solar-hybrid solution specifically designed for locations having unreliable or no access to electricity. It provides customizable, reliable, and renewable energy access for homes, fuel stations, small offices, healthcare centers, educational institutions, and telecom towers. Homaya Pro is powered from solar with an inbuilt MPPT controller, compatible with grid charging, and supports Lead acid or LFP battery technology.

Facts about Homaya Pro

Product specifications

  • Supports 9 profiles of lead acid battery charging.
  • Inbuilt Maximum Power Point Tracking charging mode.
  • Robust transformer-based design.
  • Supports productive needs including domestic pumping solution.
  • Connect inverters in parallel to support loads up to 24 kW (compatible with 4kW and 6kW Hybrid Pro inverters)
  • Compatible with external MPPT chargers, each 1 kWp input (Compatible with 3kW Hybrid Pro Inverter) and 3kWp input (Compatible with 4kW and 6kW Hybrid Pro Inverters).
  • Compatible with LFP and customizable lead acid charging profile.
  • Smart autosensing of 50 or 60 Hz grid compatibility and Selectable when connected off-grid.
  • Easy monitoring using local WiFi-connected mobile phone, no internet needed.
  • Supports multi-unit operation for loads up to 24 kW (compatible with 4kW and 6kW Hybrid Pro inverters)

Features

  • Upgrade the off-grid backup time with an additional solar panel array.
  • Monitor the inverter with local WiFi and without internet connectivity.
  • Harvest the maximum power from the sun.
  • Wide grid operating voltage range.
  • Efficient battery charging.
  • Intuitive LCD display for monitoring and programming.
  • Last mile customization of different lead acid batteries and LFP charging profiles.
  • Easy to use and install.
  • Environment friendly.
₦1,103,265
Victron Energy SmartSolar MPPT 250/85-Tr VE.Can Solar Charge Controller
Victron Energy
Add to Cart
(0)

Victron Energy SmartSolar MPPT 250/85-Tr VE.Can Solar Charge Controller

  • Solar charge controller

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery bank.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

  • MPPT: Ultra Fast Maximum Power Point Tracking

The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.

The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.

  • Control Your Charger Remotely

The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.

  • Daisy Chain Additional Units

The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy-chained” to each other with a single RJ45 cable between the individual units.

When connected to each other, all individual VE.Can SmartSolar chargers, will synchronize their charge stages. They can also send their data, via a single cable, to a GX monitoring device.

  • Remote Monitoring and Control

If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).

For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the  GlobalLink 520.

  • SmartSolar Control Display

The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device.

₦960,565
SMA Data Manager
SMA Solar
Add to Cart
(0)

SMA Data Manager

One system. Many options. For your individual needs

In combination with the Sunny Portal powered by ennexOS, the Data Manager M enables monitoring, management, and grid-compliant power control in decentralized PV systems. Thanks to flexible expansion options, the Data Manager M is already well-equipped for business models in the energy market of the future. The Data Manager M is the ideal professional system interface for electric utility companies, direct sellers, service technicians, and PV system operators.

Coordinated user interfaces and intuitive assistance functions to simplify operation, parameterization, and commissioning. Both variants are modularly expandable with many additional functions and interfaces.

 

Professional monitoring and control for decentralized energy systems up to the megawatt range

The Data Manager M is the perfect monitoring and control solution for decentralized large-scale PV power plants up to 2.5 MVA with up to 50 devices. Thanks to the RS485 and Ethernet interfaces as well as analog and digital input and output systems, users benefit from particularly versatile connection options. The Data Manager M is the professional system interface for electric utility companies, direct sellers, service technicians, and PV system operators.

Quick and easy

  • Easy integration of devices

  • Centralized commissioning of all integrated components

Future-proof and flexible

  • Flexibly expandable anytime

  • Access to the energy market of the future based on ennexOS

Functional

  • Complies with international grid integration requirements

  • Combine storage systems, energy generators, and e-mobility

Reliable and convenient

  • Remote monitoring and parameterization are possible

  • Detailed analytics, error messages, and reporting through Sunny Portal

₦2,440,500
Growatt SPF 5000 ES Off-Grid Inverter
Growatt
Add to Cart
(0)

Growatt SPF 5000 ES Off-Grid Inverter

Why choose Growatt SPF 5000 ES Off-Grid Inverter?

Monitoring: The system can also be remotely monitored using a WiFi or GPRS dongle. Parallel scaling is supported.

Charge controller: The MPPT charge controller lowers the voltage of panels to the required level to charge the battery. The current is raised with the same ratio as the voltage is lowered.

This continuously happens during the day to optimize the use of energy. This is dependent on the power of the sun, the angle, and the temperature and health of the panels.

The charge controller also makes sure the battery will not be overcharged, but also not fully discharged.

Capacity expansion: The system’s capacity can be expanded up to 30kW by combining a total of six of these units in parallel operation.

Specification

Model Growatt SPF 5000 ES
Battery Voltage 48VDC
Battery Type Lithium/Lead-acid
Rated Power 5000VA/5000W
Parallel Capability Yes, 6 units maximum
AC Voltage Regulation (Battery Mode) 230VAC ± 5% @ 50/60Hz
Surge Power 10000VA
Efficiency 93%
Waveform Pure sine wave
Maximum PV Array Power 6000W
MPPT Range @ Operating Voltage 120VDC ~ 430VDC
Number of Independent MPP Trackers/Strings Per MPP Tracker 1/1
Maximum PV Array Open Circuit Voltage 450VDC
Maximum Solar Charge Current 100A
AC Charge Current 80A
AC Input Voltage 230 VAC
Dimensions 330x485x135mm | 12kg
Operating Temperature 0°C – 55°C
Storage Temperature -15°C – 60°C

Key Feature

  • Integrated MPPT charge controller.
  • Equalization charging function.
  • Work with battery or without battery.
  • Maximum PV input voltage up to 450VDC.
  • Configurable grid or solar input priority.
  • Optional WIFI/ GPRS remote monitoring.
  • Support parallel operation for capacity expansion up to 30kW.
  • PV and Grid power the load jointly if PV energy is insufficient.
  • Flexible schedule of the Inverter charging and discharging time.
₦562,350